JVC GR-DVL315 specifications Loading/Unloading a Cassette, Approximate recording time

Page 11

Erase protection tab*

Make sure the window side is facing out.

PUSH HERE

Cassette

 

holder

Cassette holder cover

OPEN/EJECT Switch

EN11

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

1 Slide and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically.

•Do not touch internal components.

2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

•When the battery’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery with a fully charged one before continuing.

3 Close the cassette holder cover firmly until it locks into place.

*To Protect Valuable Recordings . . .

.... slide the erase protection tab on the back of

the tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the tab back to “REC” before loading it.

Be sure to press only the section labeled “PUSH HERE” to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage.

Approximate recording time

Tape

Recording mode

 

 

 

SP

LP

 

 

 

30 min.

30 min.

45 min.

 

 

 

60 min.

60 min.

90 min.

 

 

 

80 min.

80 min.

120 min.

 

 

 

NOTES:

It takes a few seconds for the cassette holder to open. Do not apply force.

If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.

If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again.

When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover.

Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder.

Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not. See page 17 for information about recording from the middle of a tape.

Image 11
Contents GR-DVL315 It is recommended that you Dear CustomerSafety Precautions RM-V715U BN-V408U AAA R03 Battery x Lens Cap  pg Remote Control UnitAutomatic Demonstration How To Attach The Lens CapGetting Started ContentsSlide BAT. Release and pull out the battery pack PowerCharging the Battery Pack To Detach The Battery PackSelection in the AC range from 110 V to 240 Using the Battery PackUsing AC Power About BatteriesTripod Mounting Grip AdjustmentViewfinder Adjustment Shoulder Strap Attachment10 EN Date/Time SettingsApproximate recording time Loading/Unloading a Cassette12 EN Recording Mode SettingSet the tape recording mode depending on your preference Basic Recording & Playback ContentsBasic Recording To Adjust The Brightness Of The Display14 EN Basic RecordingSELF-RECORDING Operation ModePower Switch Position Manual Journalistic ShootingVideo Light 16 ENZooming Proper recording When a blank portion is recorded on a tapeTime Code Normal Playback To Control The Speaker Volume18 EN BasicPress Blank Search To cancel Blank Search midwayBlank Search 20 EN EN21 If using a VCR . . . go to step If not . . . go to step22 EN Advanced FeaturesSnapshot Recording Snapshot Mode SelectionFor Recording SnapshotProgram AE With Special Effects To Deactivate The Selected Mode24 EN Night-AliveSlow Slow Shutter Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots Picture Wipe or Dissolve Selection 26 ENFade/Wipe Effects FADE/WIPE SelectionMenu Effect Fader And Wipe MenuTo obtain correct focus Feature Auto FocusFeature Manual Focus 28 ENIris Lock Exposure ControlTo Return To Automatic White Balance White Balance Adjustment30 EN Manual White Balance OperationSystem or Display Using Menus for Detailed AdjustmentFor Recording Menu If you have selected WIPE/FADER Program AE or W. BalanceMenu Screen Explanations Appears. The quality Sound will change. This is normal Normal screen ratioScreen ratio becomes When the date is changed during video playback Does not reset all settings to the factory-presetResets all settings to the factory-preset When the Power Switch is set from OFF to orFor Playback Menu Following procedure applies to all except Synchro Comp  pgDisplay Playback SoundDubbing To a VCR DubbingTo use this camcorder as a player 38 ENInstalling The Battery RM-V700U, optional Using the Remote Control UnitInstalling The Batteries RM-V715U, provided RM-V700U Press Play 4 to find the scene of interest Feature Playback ZoomVCR Recording deck 42 ENRandom Assemble Editing R.A.Edit SET REMOTE/VCR CodeVCR other than above JVC VCR equipped with a remote pause connectorMake Connections Select Scenes 44 ENAutomatic Editing to VCR Diagnosing VCR/CAMCORDER Timing Adjustment of VCR/CAMCORDER Timing46 EN For More Accurate EditingTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing Using DV cable Using PC connection cableUsing DV cable AUsing PC connection cableConnection To a Video Unit Equipped With a DV Connector References 50 EN pg PowerDetails Replace with new cassette Clean the lens and check52 EN Corrective ActionEN53 54 EN TroubleshootingEN55 56 EN Press Push Here to close the cassette holder User MaintenanceAfter Use Cleaning The Camcorder Turn off the camcorder58 EN Twq%Stop Button  pg NIGHT-ALIVE Button Rewind Button Video Output Connector  pg , 37Connect the editing cable when performing Monitor Open Button Push Open  pgLCD Monitor/Viewfinder Indications During Recording 60 ENBright Displays the brightness of the LCD Displays the sound modeLCD Monitor/Viewfinder Indications During Playback Indications Function Video Light Store cassettes 64 ENTrade Name About moisture condensationSerious malfunctioning Declaration of Conformity Model NumberTerms 66 ENFor Digital Video Camera SpecificationsFor Connectors For GeneralGR-DVL315

GR-DVL315 specifications

The JVC GR-DVL315 is a compact digital video camcorder that gained popularity in the early 2000s for its combination of portability and advanced features, catering to amateur filmmakers and casual users alike. This camcorder is part of JVC's D-Serie and exemplifies the brand's commitment to quality and innovation in video capture technology.

One of the standout features of the GR-DVL315 is its ability to record in high-quality digital video. It utilizes MiniDV tapes, which were considered a standard in the industry, allowing users to capture video at a resolution of up to 500 lines of horizontal resolution. This results in clear, sharp images suitable for a variety of viewing formats. Furthermore, the cassette-based format offers the advantage of non-linear editing, making it easier to manipulate and organize footage after recording.

The GR-DVL315 boasts a 680,000-pixel CCD (Charge-Coupled Device) sensor, which significantly enhances the image quality by providing better low-light performance and increased detail. This camcorder is equipped with a powerful 10x optical zoom lens, allowing for versatile shooting options, from wide angles to close-ups, making it perfect for different shooting environments. The digital zoom feature can further enhance capabilities, though using excessive digital zoom may impact the quality of the footage.

Another notable innovation in the GR-DVL315 is its built-in digital effects and transitions, which enable users to add creative touches to their videos. Features like fades, wipes, and even titles enhance the storytelling aspect of the recorded footage. The camcorder also includes a 2.5-inch LCD screen, providing a clear viewfinder for framing shots while facilitating easy navigation of menu options.

The camcorder comes with a FireWire (IEEE 1394) port for quick and easy connection to a computer, upping the ante for post-production work. This connectivity feature allows for fast data transfers and real-time video editing, which is crucial for users looking to produce polished videos efficiently.

Additionally, the GR-DVL315 is designed with ease of use in mind. Its lightweight body and ergonomic grip make it comfortable to hold for extended periods. The intuitive button layout simplifies operation, allowing even novice users to start shooting with minimal learning curve.

In summary, the JVC GR-DVL315 is a remarkable example of early 2000s camcorder technology, blending performance, portability, and user-friendly features. Its combination of impressive imaging capabilities, creative editing options, and connectivity makes it a versatile tool for budding videographers and casual users capturing life's moments on tape.