JVC GR-DVL315 specifications 38 EN, To use this camcorder as a player

Page 38

38 EN

To DV

IN/OUT

Core filter

Lock Button

 

 

 

OFF

 

 

 

 

 

 

 

Y

 

 

A

 

 

P

L

 

 

 

 

 

 

DV cable

 

 

 

 

(optional)

Power Switch

 

Core filter

To DV

IN/OUT

Video unit equipped with DV connector

DUBBING (cont.)

Dubbing To Or From A Video Unit Equipped With A DV Connector (Digital Dubbing)

It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.

[To use this camcorder as a player]

1 Make sure all units are turned off. Connect the camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

2 Set the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch, turn on the video unit’s power, and insert the appropriate cassettes in the camcorder and the video unit.

3 Press 4 to play back the source tape.

4 While watching the playback on the monitor, engage the DV connector-equipped video unit’s record mode from the spot on the source tape you want to begin recording.

NOTES:

It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 8).

If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units.

If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

Even though the DV cable is connected correctly, some- times the image may not appear in step 4. If this occurs, turn off the power and make connections again.

If “Playback Zoom” (  pg. 41) or “Snapshot” is attempted during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.

When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.

To Use This Camcorder As A Recorder . . .

1.Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.

2.Set “REC MODE” to “SP” or “LP” in the Menu Screen ( pg. 35).

3.Connect the DV cable as shown in the illustration and load a cassette to record on.

4.Press the Recording Start/Stop button to engage the Record-Pause mode. “ DV. IN ” appears on the screen.

5.Press the Recording Start/Stop button to start recording. rotates.

6.Press the Recording Start/Stop button again to engage the Record-Pause mode. stops rotating.

NOTES:

Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting (  pg. 32).

During Digital Dubbing, no signals are output from the video or audio connectors.

Image 38
Contents GR-DVL315 Dear Customer It is recommended that youSafety Precautions Remote Control Unit RM-V715U BN-V408U AAA R03 Battery x Lens Cap  pgHow To Attach The Lens Cap Automatic DemonstrationContents Getting StartedTo Detach The Battery Pack PowerCharging the Battery Pack Slide BAT. Release and pull out the battery packAbout Batteries Using the Battery PackUsing AC Power Selection in the AC range from 110 V to 240Shoulder Strap Attachment Grip AdjustmentViewfinder Adjustment Tripod MountingDate/Time Settings 10 ENLoading/Unloading a Cassette Approximate recording time12 EN Recording Mode SettingSet the tape recording mode depending on your preference Contents Basic Recording & PlaybackBasic Recording To Adjust The Brightness Of The Display14 EN Basic RecordingJournalistic Shooting Operation ModePower Switch Position Manual SELF-RECORDINGVideo Light 16 ENZooming Proper recording When a blank portion is recorded on a tapeTime Code Basic To Control The Speaker Volume18 EN Normal PlaybackPress Blank Search To cancel Blank Search midwayBlank Search 20 EN If using a VCR . . . go to step If not . . . go to step EN21Advanced Features 22 ENSnapshot Snapshot Mode SelectionFor Recording Snapshot RecordingNight-Alive To Deactivate The Selected Mode24 EN Program AE With Special EffectsSlow Slow Shutter Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots FADE/WIPE Selection 26 ENFade/Wipe Effects Picture Wipe or Dissolve SelectionFader And Wipe Menu Menu Effect28 EN Feature Auto FocusFeature Manual Focus To obtain correct focusExposure Control Iris LockManual White Balance Operation White Balance Adjustment30 EN To Return To Automatic White BalanceIf you have selected WIPE/FADER Program AE or W. Balance Using Menus for Detailed AdjustmentFor Recording Menu System or DisplayMenu Screen Explanations Appears. The quality Sound will change. This is normal Normal screen ratioScreen ratio becomes When the Power Switch is set from OFF to or Does not reset all settings to the factory-presetResets all settings to the factory-preset When the date is changed during video playbackFollowing procedure applies to all except Synchro Comp  pg For Playback MenuPlayback Sound DisplayDubbing Dubbing To a VCR38 EN To use this camcorder as a playerInstalling The Battery RM-V700U, optional Using the Remote Control UnitInstalling The Batteries RM-V715U, provided RM-V700U Feature Playback Zoom Press Play 4 to find the scene of interestSET REMOTE/VCR Code 42 ENRandom Assemble Editing R.A.Edit VCR Recording deckVCR other than above JVC VCR equipped with a remote pause connectorMake Connections 44 EN Select ScenesAutomatic Editing to VCR For More Accurate Editing Adjustment of VCR/CAMCORDER Timing46 EN Diagnosing VCR/CAMCORDER TimingTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing AUsing PC connection cable Using PC connection cableUsing DV cable Using DV cableConnection To a Video Unit Equipped With a DV Connector 50 EN References pg PowerDetails Corrective Action Clean the lens and check52 EN Replace with new cassetteEN53 Troubleshooting 54 ENEN55 56 EN Turn off the camcorder User MaintenanceAfter Use Cleaning The Camcorder Press Push Here to close the cassette holderTwq% 58 ENMonitor Open Button Push Open  pg Video Output Connector  pg , 37Connect the editing cable when performing Stop Button  pg NIGHT-ALIVE Button Rewind Button60 EN LCD Monitor/Viewfinder Indications During RecordingBright Displays the brightness of the LCD Displays the sound modeLCD Monitor/Viewfinder Indications During Playback Indications Function Video Light 64 EN Store cassettesDeclaration of Conformity Model Number About moisture condensationSerious malfunctioning Trade Name66 EN TermsFor General SpecificationsFor Connectors For Digital Video CameraGR-DVL315

GR-DVL315 specifications

The JVC GR-DVL315 is a compact digital video camcorder that gained popularity in the early 2000s for its combination of portability and advanced features, catering to amateur filmmakers and casual users alike. This camcorder is part of JVC's D-Serie and exemplifies the brand's commitment to quality and innovation in video capture technology.

One of the standout features of the GR-DVL315 is its ability to record in high-quality digital video. It utilizes MiniDV tapes, which were considered a standard in the industry, allowing users to capture video at a resolution of up to 500 lines of horizontal resolution. This results in clear, sharp images suitable for a variety of viewing formats. Furthermore, the cassette-based format offers the advantage of non-linear editing, making it easier to manipulate and organize footage after recording.

The GR-DVL315 boasts a 680,000-pixel CCD (Charge-Coupled Device) sensor, which significantly enhances the image quality by providing better low-light performance and increased detail. This camcorder is equipped with a powerful 10x optical zoom lens, allowing for versatile shooting options, from wide angles to close-ups, making it perfect for different shooting environments. The digital zoom feature can further enhance capabilities, though using excessive digital zoom may impact the quality of the footage.

Another notable innovation in the GR-DVL315 is its built-in digital effects and transitions, which enable users to add creative touches to their videos. Features like fades, wipes, and even titles enhance the storytelling aspect of the recorded footage. The camcorder also includes a 2.5-inch LCD screen, providing a clear viewfinder for framing shots while facilitating easy navigation of menu options.

The camcorder comes with a FireWire (IEEE 1394) port for quick and easy connection to a computer, upping the ante for post-production work. This connectivity feature allows for fast data transfers and real-time video editing, which is crucial for users looking to produce polished videos efficiently.

Additionally, the GR-DVL315 is designed with ease of use in mind. Its lightweight body and ergonomic grip make it comfortable to hold for extended periods. The intuitive button layout simplifies operation, allowing even novice users to start shooting with minimal learning curve.

In summary, the JVC GR-DVL315 is a remarkable example of early 2000s camcorder technology, blending performance, portability, and user-friendly features. Its combination of impressive imaging capabilities, creative editing options, and connectivity makes it a versatile tool for budding videographers and casual users capturing life's moments on tape.