JVC GR-DVL315 Time Code, When a blank portion is recorded on a tape, Proper recording

Page 17

EN17

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback.

If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.

To perform Random Assemble Editing ( pg. 42 – 46), time code is necessary. If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle of A Tape” below in the following cases;

•When shooting again after playing back a recorded tape.

•When power shuts off during shooting.

•When a tape is removed and re-inserted during shooting.

•When shooting using a partially recorded tape.

•When shooting on a blank portion located partway through the tape.

•When shooting again after shooting a scene then opening/closing the cassette holder cover.

Display

 

 

 

 

 

 

 

Frames are not displayed

 

 

 

 

 

 

 

during recording.

 

 

 

 

 

 

 

 

 

Minutes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Seconds

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frames

 

 

 

 

 

 

 

 

 

1

 

2 : 3

 

4 : 2

 

4

 

 

(30 frames = 1 second)

 

 

 

 

 

Recording From The Middle Of A Tape

1.Play back a tape or use Blank Search ( pg. 19) to find the spot at which you want to start recording, then engage the Still Playback mode ( pg. 18).

2.Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch, then start recording.

NOTES:

●The time code cannot be reset.

●During fast-forwarding and rewinding, the time code indication does not move smoothly.

●The time code is displayed only when “TIME CODE” is set to “ON” (  pg. 34, 35).

When a blank portion is recorded on a tape

Time code

Time code

Time code

00:00:00

05:43:21

00:00:00

Tape

Already recorded scene

Blank

Newly recorded scene

Shooting start pointShooting stop point Shooting start point

Proper recording

Time code

Time code

Time code

00:00:00

05:43:21

05:44:00

Tape

Already recorded scene

New scene

Latest scene

Shooting start point

Shooting start point

Shooting start point

Page 16 Page 18
Image 17
Page 16 Page 18
Contents GR-DVL315 It is recommended that you Dear CustomerSafety Precautions RM-V715U BN-V408U AAA R03 Battery x Lens Cap  pg Remote Control UnitAutomatic Demonstration How To Attach The Lens CapGetting Started ContentsCharging the Battery Pack PowerTo Detach The Battery Pack Slide BAT. Release and pull out the battery packUsing AC Power Using the Battery PackAbout Batteries Selection in the AC range from 110 V to 240Viewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Tripod Mounting10 EN Date/Time SettingsApproximate recording time Loading/Unloading a Cassette12 EN Recording Mode SettingSet the tape recording mode depending on your preference Basic Recording & Playback Contents14 EN To Adjust The Brightness Of The DisplayBasic Recording Basic RecordingPower Switch Position Manual Operation ModeJournalistic Shooting SELF-RECORDINGVideo Light 16 ENZooming Proper recording When a blank portion is recorded on a tapeTime Code 18 EN To Control The Speaker VolumeBasic Normal PlaybackPress Blank Search To cancel Blank Search midwayBlank Search 20 EN EN21 If using a VCR . . . go to step If not . . . go to step22 EN Advanced FeaturesFor Recording Snapshot Mode SelectionSnapshot Snapshot Recording24 EN To Deactivate The Selected ModeNight-Alive Program AE With Special EffectsSlow Slow Shutter Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots Fade/Wipe Effects 26 ENFADE/WIPE Selection Picture Wipe or Dissolve SelectionMenu Effect Fader And Wipe MenuFeature Manual Focus Feature Auto Focus28 EN To obtain correct focusIris Lock Exposure Control30 EN White Balance AdjustmentManual White Balance Operation To Return To Automatic White BalanceFor Recording Menu Using Menus for Detailed AdjustmentIf you have selected WIPE/FADER Program AE or W. Balance System or DisplayMenu Screen Explanations Appears. The quality Sound will change. This is normal Normal screen ratioScreen ratio becomes Resets all settings to the factory-preset Does not reset all settings to the factory-presetWhen the Power Switch is set from OFF to or When the date is changed during video playbackFor Playback Menu Following procedure applies to all except Synchro Comp  pgDisplay Playback SoundDubbing To a VCR DubbingTo use this camcorder as a player 38 ENInstalling The Battery RM-V700U, optional Using the Remote Control UnitInstalling The Batteries RM-V715U, provided RM-V700U Press Play 4 to find the scene of interest Feature Playback ZoomRandom Assemble Editing R.A.Edit 42 ENSET REMOTE/VCR Code VCR Recording deckVCR other than above JVC VCR equipped with a remote pause connectorMake Connections Select Scenes 44 ENAutomatic Editing to VCR 46 EN Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing Using DV cable Using PC connection cableAUsing PC connection cable Using DV cableConnection To a Video Unit Equipped With a DV Connector References 50 EN pg PowerDetails 52 EN Clean the lens and checkCorrective Action Replace with new cassetteEN53 54 EN TroubleshootingEN55 56 EN After Use Cleaning The Camcorder User MaintenanceTurn off the camcorder Press Push Here to close the cassette holder58 EN Twq%Connect the editing cable when performing Video Output Connector  pg , 37Monitor Open Button Push Open  pg Stop Button  pg NIGHT-ALIVE Button Rewind ButtonLCD Monitor/Viewfinder Indications During Recording 60 ENBright Displays the brightness of the LCD Displays the sound modeLCD Monitor/Viewfinder Indications During Playback Indications Function Video Light Store cassettes 64 ENSerious malfunctioning About moisture condensationDeclaration of Conformity Model Number Trade NameTerms 66 ENFor Connectors SpecificationsFor General For Digital Video CameraGR-DVL315

GR-DVL315 specifications

The JVC GR-DVL315 is a compact digital video camcorder that gained popularity in the early 2000s for its combination of portability and advanced features, catering to amateur filmmakers and casual users alike. This camcorder is part of JVC's D-Serie and exemplifies the brand's commitment to quality and innovation in video capture technology.

One of the standout features of the GR-DVL315 is its ability to record in high-quality digital video. It utilizes MiniDV tapes, which were considered a standard in the industry, allowing users to capture video at a resolution of up to 500 lines of horizontal resolution. This results in clear, sharp images suitable for a variety of viewing formats. Furthermore, the cassette-based format offers the advantage of non-linear editing, making it easier to manipulate and organize footage after recording.

The GR-DVL315 boasts a 680,000-pixel CCD (Charge-Coupled Device) sensor, which significantly enhances the image quality by providing better low-light performance and increased detail. This camcorder is equipped with a powerful 10x optical zoom lens, allowing for versatile shooting options, from wide angles to close-ups, making it perfect for different shooting environments. The digital zoom feature can further enhance capabilities, though using excessive digital zoom may impact the quality of the footage.

Another notable innovation in the GR-DVL315 is its built-in digital effects and transitions, which enable users to add creative touches to their videos. Features like fades, wipes, and even titles enhance the storytelling aspect of the recorded footage. The camcorder also includes a 2.5-inch LCD screen, providing a clear viewfinder for framing shots while facilitating easy navigation of menu options.

The camcorder comes with a FireWire (IEEE 1394) port for quick and easy connection to a computer, upping the ante for post-production work. This connectivity feature allows for fast data transfers and real-time video editing, which is crucial for users looking to produce polished videos efficiently.

Additionally, the GR-DVL315 is designed with ease of use in mind. Its lightweight body and ergonomic grip make it comfortable to hold for extended periods. The intuitive button layout simplifies operation, allowing even novice users to start shooting with minimal learning curve.

In summary, the JVC GR-DVL315 is a remarkable example of early 2000s camcorder technology, blending performance, portability, and user-friendly features. Its combination of impressive imaging capabilities, creative editing options, and connectivity makes it a versatile tool for budding videographers and casual users capturing life's moments on tape.
Top Page Image Contents