JVC GR-DVL315 26 EN, Fade/Wipe Effects, FADE/WIPE Selection, Picture Wipe or Dissolve Selection

Page 26
Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
Press the MENU/BRIGHT wheel in. The Menu Screen appears.
Rotate the MENU/BRIGHT wheel to select “ WIPE/FADER”, then press it.

26 EN

Fade/Wipe Effects

These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. You can also vary transitions from scene to scene.

IMPORTANT:

Some Fade/Wipe Effects cannot be used with certain modes of Program AE with special effects ( pg. 24, 25). If an unusable Fade/ Wipe Effect is selected, its indicator blinks or goes out.

MENU/BRIGHT Wheel

Power Switch

Lock Button

Recording Start/Stop Button

NOTES:

●You can extend the length of a Fade or Wipe by pressing and holding the Recording Start/ Stop Button.

●If the power is turned off after a scene is finished recording, the stored point is erased, disabling the Picture Wipe/Dissolve combina- tion. When this happens, the Picture Wipe/ Dissolve indicator blinks. Also note that power shuts off automatically if 5 minutes elapse in the Record-Standby mode.

●The sound at the end of the last recorded scene is not stored.

●Picture Wipe/Dissolve cannot be used while Night-Alive is being activated (  pg. 24).

FOR RECORDING (cont.)

FADE/WIPE SELECTION (

,

,

,

,

,

,

,

,

and

)

 

 

 

Fade or Wipe works when video recording is started or when you stop recording.

1

2

3

4 Rotate the MENU/BRIGHT wheel to select the desired function, then press it. Selection is complete. Press the MENU/BRIGHT wheel in again.

•The WIPE/FADER Menu disappears and the effect is reserved. The indicator representing the selected effect appears.

5 Press the Recording Start/Stop Button to activate the Fade-in/out or Wipe-in/out.

To Deactivate The Selected Effect . . .

.... select “OFF” in step 4.

PICTURE WIPE OR DISSOLVE SELECTION

( , , , , , and )

The Picture Wipe or Dissolve works when video recording is started.

1 Follow steps 1 through 4 above.

2 If you select Picture Wipe/Dissolve during recording . . .

.... press the Recording Start/Stop Button when one

scene is finished. The point at which the scene ended is stored in memory.

If you select Picture Wipe/Dissolve during Record- Standby mode . . .

.... press the Recording Start/Stop Button to start

recording and press it again when one scene is finished. The point at which the scene ended is stored in memory.

If you select Picture Wipe/Dissolve during Record- Standby mode after performing a Picture Wipe/ Dissolve . . .

.... the point at which the scene ended is already

stored in memory.

3 If you start recording a new scene within 5 minutes of the end of the previous recording (without having turned the camcorder’s power off), the previous scene wipes out, revealing the new scene.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents GR-DVL315 Dear Customer It is recommended that youSafety Precautions Remote Control Unit RM-V715U BN-V408U AAA R03 Battery x Lens Cap  pgHow To Attach The Lens Cap Automatic DemonstrationContents Getting StartedTo Detach The Battery Pack PowerCharging the Battery Pack Slide BAT. Release and pull out the battery packAbout Batteries Using the Battery PackUsing AC Power Selection in the AC range from 110 V to 240Shoulder Strap Attachment Grip AdjustmentViewfinder Adjustment Tripod MountingDate/Time Settings 10 ENLoading/Unloading a Cassette Approximate recording time12 EN Recording Mode SettingSet the tape recording mode depending on your preference Contents Basic Recording & PlaybackBasic Recording To Adjust The Brightness Of The Display14 EN Basic RecordingJournalistic Shooting Operation ModePower Switch Position Manual SELF-RECORDINGVideo Light 16 ENZooming Proper recording When a blank portion is recorded on a tapeTime Code Basic To Control The Speaker Volume18 EN Normal PlaybackPress Blank Search To cancel Blank Search midwayBlank Search 20 EN If using a VCR . . . go to step If not . . . go to step EN21Advanced Features 22 ENSnapshot Snapshot Mode SelectionFor Recording Snapshot RecordingNight-Alive To Deactivate The Selected Mode24 EN Program AE With Special EffectsSlow Slow Shutter Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots FADE/WIPE Selection 26 ENFade/Wipe Effects Picture Wipe or Dissolve SelectionFader And Wipe Menu Menu Effect28 EN Feature Auto FocusFeature Manual Focus To obtain correct focusExposure Control Iris LockManual White Balance Operation White Balance Adjustment30 EN To Return To Automatic White BalanceIf you have selected WIPE/FADER Program AE or W. Balance Using Menus for Detailed AdjustmentFor Recording Menu System or DisplayMenu Screen Explanations Appears. The quality Sound will change. This is normal Normal screen ratioScreen ratio becomes When the Power Switch is set from OFF to or Does not reset all settings to the factory-presetResets all settings to the factory-preset When the date is changed during video playbackFollowing procedure applies to all except Synchro Comp  pg For Playback MenuPlayback Sound DisplayDubbing Dubbing To a VCR38 EN To use this camcorder as a playerInstalling The Battery RM-V700U, optional Using the Remote Control UnitInstalling The Batteries RM-V715U, provided RM-V700U Feature Playback Zoom Press Play 4 to find the scene of interestSET REMOTE/VCR Code 42 ENRandom Assemble Editing R.A.Edit VCR Recording deckVCR other than above JVC VCR equipped with a remote pause connectorMake Connections 44 EN Select ScenesAutomatic Editing to VCR For More Accurate Editing Adjustment of VCR/CAMCORDER Timing46 EN Diagnosing VCR/CAMCORDER TimingTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing AUsing PC connection cable Using PC connection cableUsing DV cable Using DV cableConnection To a Video Unit Equipped With a DV Connector 50 EN References pg PowerDetails Corrective Action Clean the lens and check52 EN Replace with new cassetteEN53 Troubleshooting 54 ENEN55 56 EN Turn off the camcorder User MaintenanceAfter Use Cleaning The Camcorder Press Push Here to close the cassette holderTwq% 58 ENMonitor Open Button Push Open  pg Video Output Connector  pg , 37Connect the editing cable when performing Stop Button  pg NIGHT-ALIVE Button Rewind Button60 EN LCD Monitor/Viewfinder Indications During RecordingBright Displays the brightness of the LCD Displays the sound modeLCD Monitor/Viewfinder Indications During Playback Indications Function Video Light 64 EN Store cassettesDeclaration of Conformity Model Number About moisture condensationSerious malfunctioning Trade Name66 EN TermsFor General SpecificationsFor Connectors For Digital Video CameraGR-DVL315

GR-DVL315 specifications

The JVC GR-DVL315 is a compact digital video camcorder that gained popularity in the early 2000s for its combination of portability and advanced features, catering to amateur filmmakers and casual users alike. This camcorder is part of JVC's D-Serie and exemplifies the brand's commitment to quality and innovation in video capture technology.

One of the standout features of the GR-DVL315 is its ability to record in high-quality digital video. It utilizes MiniDV tapes, which were considered a standard in the industry, allowing users to capture video at a resolution of up to 500 lines of horizontal resolution. This results in clear, sharp images suitable for a variety of viewing formats. Furthermore, the cassette-based format offers the advantage of non-linear editing, making it easier to manipulate and organize footage after recording.

The GR-DVL315 boasts a 680,000-pixel CCD (Charge-Coupled Device) sensor, which significantly enhances the image quality by providing better low-light performance and increased detail. This camcorder is equipped with a powerful 10x optical zoom lens, allowing for versatile shooting options, from wide angles to close-ups, making it perfect for different shooting environments. The digital zoom feature can further enhance capabilities, though using excessive digital zoom may impact the quality of the footage.

Another notable innovation in the GR-DVL315 is its built-in digital effects and transitions, which enable users to add creative touches to their videos. Features like fades, wipes, and even titles enhance the storytelling aspect of the recorded footage. The camcorder also includes a 2.5-inch LCD screen, providing a clear viewfinder for framing shots while facilitating easy navigation of menu options.

The camcorder comes with a FireWire (IEEE 1394) port for quick and easy connection to a computer, upping the ante for post-production work. This connectivity feature allows for fast data transfers and real-time video editing, which is crucial for users looking to produce polished videos efficiently.

Additionally, the GR-DVL315 is designed with ease of use in mind. Its lightweight body and ergonomic grip make it comfortable to hold for extended periods. The intuitive button layout simplifies operation, allowing even novice users to start shooting with minimal learning curve.

In summary, the JVC GR-DVL315 is a remarkable example of early 2000s camcorder technology, blending performance, portability, and user-friendly features. Its combination of impressive imaging capabilities, creative editing options, and connectivity makes it a versatile tool for budding videographers and casual users capturing life's moments on tape.
Top Page Image Contents