JVC GR-DVL1020, GR-DVL820 specifications

Page 4

EN 3

CAUTIONS:

This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere.

Use the JVC BN-V408U/V416U/V428U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter and Power Cord. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).

Do not block the ventilation holes.

(If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)

No naked flame sources, such as lighted candles, should be placed on the apparatus.

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

The apparatus shall not be exposed to dripping or splashing.

Do not use this equipment in a bathroom or places with water.

Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups etc.) on top of this unit.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

Image 4
Contents GR-DVL1020 GR-DVL820 GR-DVL520 GR-DVL320 Unload a Tape WebCamZooming See previous page as wellDear Customer It is recommended that youPage Before recording an important scene How To Attach The Lens Cap AC Adapter AP-V10EG orBN-V408U Both plugs have 1 ring around the pinSet the Power Switch to How To Attach The Core FilterWhile pressing down Getting Started Power Charging the Battery PackBattery pack Charging time To Detach The Battery PackUsing the Battery Pack Using AC PowerApproximate recording time GR-DVL520/DVL320 Approximate recording time GR-DVL1020/DVL820Grip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings MENU/BRIGHT Wheel Power LampLock Button Display Display Menu12 EN Approximate recording time Tape Recording modeLoading/Unloading a Cassette Recording Mode Setting Set the tape recording mode depending on your preferenceSP mode Audio Dubbing pg and Insert EditingLoading a Memory Card Picture Quality/Image Size SettingTo Unload a Memory Card Tape Recording To Adjust The Brightness Of The Display 16 ENBasic Recording To Stop RecordingOperation Mode Power Switch PositionVIDEO/MEMORY Switch Position GR-DVL1020/DVL820/DVL520 only Journalistic ShootingSlide the Power Zoom Lever towards T 18 ENZoom Zoom OutTo brighten the scene when natural lighting is too dim Set Light OFF/AUTO/ON as required OFF Turns off the lightWhen a blank portion is recorded on a tape 20 ENTime Code Proper recordingTo Control The Speaker Volume Normal Playback22 EN ConnectionsIf using a VCR . . . go to step If not . . . go to step Date/Time Set DATE/TIME to AUTO, on or OFF Menu Screen pgTo cancel Blank Search midway 24 ENBlank Search PressMemory Card Recording Playback 26 EN Basic Shooting SnapshotTo Delete Unwanted Still Images To Remove The Shutter SoundTo Protect Valuable Files available only for SD Memory Card Approximate Number of Storable Images GR-DVL52028 EN Auto PlaybackIf you are viewing an Image file If you are viewing an E-MAIL Clip fileViewing File Information Index PlaybackRemoving On-Screen Display 30 EN Protecting FilesTo Remove Protection Stored file is displayedDeleting Files Delete Screen32 EN Dubbing Still Images Recorded On a Tape To a Memory CardLock Button Display Menu Screen Play/Pause Button 4/6 Stop Button MENU/BRIGHT WheelTo cancel E-Mail Clip Recording To Make Video Clips from REAL-TIME Camera ImageTo Make Video Clips from Recorded Video Footage To view video clips stored on a memory cardTo Reset The Setting 34 ENTo Print ALL Still Images ONE Print for Each Press the MENU/BRIGHT wheel in. The Menu Screen appearsTo Print by Selecting Still Images NO. of Prints To Reset The No. Of PrintsFast-Forward 3 Button Rewind Button 36 EN Making a New FolderInitialising a Memory Card Folder and File namesAdvanced Features To Deactivate The Selected Mode 38 ENNight-Scope To Deactivate Night-ScopeSports Variable Shutter Speed 1/250 1/4000 Makes evening scenes look more naturalGives recorded scenes a strobe effect Your recording looks like a series of consecutive snapshotsPower Switch Recording Start/Stop Button 40 ENFade/Wipe Effects To Deactivate The Selected EffectFader And Wipe Menu Menu EffectSnapshot Mode Selection Switch to42 EN Snapshot For Tape RecordingWhile focusing on a nearer subject To obtain correct focusFocus detection zone SubjectExposure Control 44 ENIris Lock Manual White Balance Operation White Balance AdjustmentTo Return To Automatic White Balance 46 EN For Recording MenuSee pg If you have selected Camera MANUAL, SYSTEM, Display orFactory-preset Menu Screen Explanations10X 40XScreen ratio becomes Appears. When using this mode, refer From 01 to 99. Factory setting isNormal screen ratio Screen and the image appears like a letterboxed 169 movieRefer to Picture Quality/Image Size Setting pg GR-DVL1020/DVL820/DVL520 onlyTo VIDEO, still images are recorded only onto the tape Camera Menu is also applicable to memory card recording50 EN For Playback MenuPlayback Sound DisplayConnector cover Power Switch To AV Audio/Video 52 ENDubbing To Or From a VCR Video cable Optional White to Audio Or OUT Yellow to Red toTo use this camcorder as a player Press 4 to play back the source tapeTo DV Core filter Core filter To DVInstalling The Batteries 54 ENWith the camcorder’s Power Switch Switch set to the camera Set to Play56 EN To allow frame-by-frame search during tape playbackTo allow you to add creative effects to the playback image Select MenuFeature Playback Zoom SET REMOTE/VCR Code 58 ENVCR Recording deck Connect the editing cable to the Remote Pause connector Connect the editing cable to the R.A.EDIT ConnectorMake Connections Also refer to pg60 EN Select ScenesRandom Assemble Editing Menu appears Editing MenuAutomatic Editing to VCR Adjustment of VCR/CAMCORDER Timing 62 ENFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingSet 12BIT Mode to Sound 2 or MIX Menu Screen pg Audio DubbingTo hear the dubbed sound during playback DUB64 EN Insert EditingUsing USB or PC connection cable Using DV cableFor GR-DVL1020/DVL820/DVL520 Owners To PC RS-232C66 EN This camcorder can be used as a WebCam via USB connectionReferences Lithium-ion is vulnerable in colder temperatures 68 ENAbout Batteries Benefits Of Lithium-Ion BatteriesOr OFF To MemoryTape END appears For Memory Card Recording70 EN Find a white subject and compose10X optical zoom is selected Set Zoom to 40X or 700X Video pgWhite Balance cannot be Sepia or Monotone mode is Activated Setting White Balance pg When shooting a subjectThis is normal Power Switch is set to Auto Set the VIDEO/MEMORY Switch to Memory72 EN Rear of the LCD monitor is hotIndication remains even though You repeat the above two or threeTimes, please consult your nearest JVC dealer74 EN Cleaning The CamcorderAfter Use To prevent damage and prolong service life Use only the following batteries AAA R03 size xTo avoid hazards Do not burn76 EN About moisture condensation Serious malfunctioning78 EN Power requirement Storage mediaCompression system File sizeIndex Controls, Connectors And Indicators 80 ENOPEN/EJECT Switch Power SwitchVideo Light Switch DC Input Connector Digital Video Connector1024 Displays the selected Fade/Wipe effectAppears when Night-Scope is engaged. pg # @Volume 84 ENLCD Monitor/Viewfinder Indications During Tape Playback Index IndicationsIndications 86 EN Darken The LCD Monitor Mail Clip RecordingFade-In/Out Gain Up