72 EN | TROUBLESHOOTING (cont.) |
SYMPTOM
wThe rear of the LCD monitor is hot.
eThe indicators and the image colour on the LCD monitor are not clear.
rThe LCD monitor or viewfinder indications blink.
tColoured bright spots appear all over the LCD monitor or the viewfinder.
yDuring recording, sound cannot be heard.
uPlay, Rewind and Fast- Forward functions do not work.
iA memory card cannot be played back.
oThe LCD monitor image is distorted.
pImages on the LCD monitor are jittery.
QBlocks of noise appear during playback, or there is no playback picture and the screen becomes blue.
POSSIBLE CAUSES
•The light used to illuminate the LCD monitor causes it to become hot.
•This may occur when the surface or the edge of the LCD monitor is pressed.
•Certain Fade/Wipe effects, certain modes of Programme AE with special effects, “DIS” and other functions that cannot be used together are selected at the same time.
•The LCD monitor and the view- finder are made with
•This is normal.
•The Power Switch is set to “ AUTO ”
or “ | MANUAL | ”. |
|
|
|
|
|
| |
• The Power Switch is set to “ | AUTO | ” | ||
or “ | MANUAL | ”. |
|
|
|
|
|
| |
•The VIDEO/MEMORY Switch is set to “VIDEO”.
•During playback of the unrecorded portion,
•The speaker volume is too great.
CORRECTIVE ACTION
•Close the LCD monitor to turn it off or set the Power Switch to “OFF”, and let the unit cool down.
•
with special effects and “DIS” (☞ pg. 38 – 41, 47).
•Set the Power Switch to “PLAY” (☞ pg. 21).
•Set the Power Switch to “PLAY” (☞ pg. 28).
•Set the VIDEO/MEMORY Switch to “MEMORY”.
•Turn the speaker volume down (☞ pg. 21).
•Clean the video heads with an
optional cleaning cassette (☞ pg. 76).