JVC GR-DLS1 manual 74 EN, Troubleshooting, Mode is set to OFF, Red or black for an instant

74EN

TROUBLESHOOTING(Cont.)

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

18.The Picture Wipe and Dissolve functions don’t work.

18.•The last selected editing

scene is ending. •At the end of the last

selected scene for editing, the Power Dial was set to “OFF”.

•The power is off.

18.•Select Picture Wipe or Dissolve before beginning recording. The effects are then automatically

activated (☞ pg. 40). •Do not turn off the

camcorder’s power after setting Edit-In and Edit-Out points, as they will all be erased (☞ pg. 40).

•The camcorder automatically shuts off after 5 minutes have elapsed in the Record- Standby mode. Make sure you continue operations within

5 minutes after engaging Record-Standby mode (☞ pg. 40).

19. The Picture Wipe function	19.	•The Slow Shutter effect is	19.	•Make sure the Squeeze
doesn’t work.		activated.		mode, Cinema mode, or
		•The Squeeze or Cinema		Slow Shutter effect is not
		mode is selected in the		activated when preparing to
		Recording Menu.		use the Picture Wipe
				function
				(☞ pg. 34, 45).
20. Even when Slow Shutter	20.	•When shooting in the dark,	20.	•If you want the lighting to
isn't selected, the image		the unit becomes highly		look more natural, set
looks like it is activated.		sensitive to light and the		GAIN UP to “AGC” or
		image takes on an effect		“OFF” in the Recording
		similar to Slow Shutter.		Menu (☞ pg. 34).
21. The Video Echo effect	21.	•The Picture Wipe or	21.	•Make sure the Squeeze
doesn’t work.		Dissolve functions are in use.		mode is set to “OFF”
		•The Squeeze mode is		(☞ pg. 34).
		selected in the Recording		•Do not try to use the Video
		Menu.		Echo effect during a
		•A Fade-In or Fade-Out is in		Fade-In or Fade-Out
		progress (White Fader, Black		(☞ pg. 38).
		Fader or Black & White
		Fader).
22. There is no strobe when	22.	•The Picture Wipe or	22.	•Do not try to use the
the Classic Film or Strobe		Dissolve function is in use.		Classic Film or Strobe
effect is activated.				effect during a scene
				transition (☞ pg. 45).
23. White Balance cannot be	23.	•The Sepia or Monotone	23.	•Turn off Sepia or Monotone
activated.		effect is activated.		before setting White
				Balance (☞ pg. 44).
24. When shooting a subject	24.	•This is a result of	24.
illuminated by bright		exceedingly high contrast,		————
light, vertical lines appear.		and is not a malfunction.
25. When the screen is under	25.	•This is not a malfunction.	25.
direct sunlight during

shooting, the screen becomes	————
red or black for an instant.