JVC GR-DVL315A, GR-DVL810A, GR-DVL610SH EN35, To Print by Selecting Still Images and NO. of Prints

MENU/BRIGHT Wheel

EN35

TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS

		Display
NEXT		<D P O F >		VGA
100-DVC00021
1 9	0 0	2 0	0 0	2 1
2 2	0 0	2 3	0 0	2 4	0 0

	DPOF
SELECT	–	CANCEL
		EXECUTE

DPOF Screen

Confirmation Screen

1 Perform steps 1 through 3 on pg. 34.

2 Rotate the MENU/BRIGHT wheel to selsect “SELECT” and press it. Selection is complete. The DPOF Screen appears.

3 Rotate the MENU/BRIGHT wheel to move the green frame to the image you wish to print and press it.

4 Select the number of prints by rotating the MENU/ BRIGHT wheel towards “+” to increase the number, or towards “–” to decrease the number and press it. Repeat steps 3 and 4 for the desired number of prints.

•The number of prints can be set up to 15.

•To correct the number of prints, select the image again and change the number.

5 Rotate the MENU/BRIGHT wheel upward to select “NEXT” and press it. Selection is complete. The Confirmation Screen appears.

6 Rotate the MENU/BRIGHT wheel to select “EXECUTE” and press it. The normal playback screen appears.

•To cancel selection, rotate the MENU/BRIGHT wheel to select “CANCEL” and press it.

To Reset The No. Of Prints . . .

.... select “RESET” in step 4 on pg. 34. The number of

prints is reset to 0 for all still images.

CAUTION:

While performing the above, never disconnect power, as this may cause the memory to be corrupted.

NOTES:

●If you load a memory card already set as shown above in a printer compatible with DPOF, it will make prints of the selected still images automatically.

●To print images recorded on a tape, first dub them to a memory card (
pg. 56).