JVC GR-DVL610A, GR-DVL315A, GR-DVL810A, GR-DVL610SH, GR-DVL710A specifications EN73

		EN73
SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
9. The colour of Snapshot looks	9. • The light source or the subject	9. • Find a white subject and
strange.	does not include white. Or	compose your shot so that it
	there are various different	also appears in the frame
	light sources behind the	( pg. 26, 42).
	subject.	• Turn off Sepia and Monotone
	• The Sepia or Monotone mode	( pg. 38, 39).
	is activated.
10. The image taken using	10. • Shooting was performed	10. • Press the BACKLIGHT Button
Snapshot is too dark.	under backlit conditions.	( pg. 44).
11. The image taken using	11. • The subject is too bright.	11. • Set “PROGRAM AE” to
Snapshot is too bright.		“SPOTLIGHT” in the Menu
		Screen ( pg. 38).
12. Digital Zoom does not work.	12. • 10X optical zoom is selected.	12. • Set “ZOOM” to “40X” or
	• “PROGRAM AE” is set to	“500X” in the Menu Screen
	“VIDEO ECHO” in the Menu	( pg. 47).
	Screen.	• Disengage the “VIDEO
	• Picture Wipe or Dissolve are	ECHO” mode ( pg. 18, 39).
	being used in a scene	• Wait until the Picture Wipe or
	transition.	Dissolve effects are completed
		( pg. 18, 40).
13. The Black & White Fader	13. • The Sepia or Monotone mode	13. • Turn off Sepia and Monotone
does not work.	is activated.	( pg. 38, 40).
14. The Dissolve function does	14. • The Sepia, Monotone or Slow	14. • Turn off Sepia, Monotone or
not work.	Shutter mode of Programme	Slow Shutter before adding
	AE with special effects is	Dissolve to a scene transition
	activated.	( pg. 38, 40).
	• “WIDE MODE” is set to	• Set “WIDE MODE” to
	“SQUEEZE” in the Menu	“CINEMA” or “OFF” mode
	Screen.	( pg. 48).
	• The previously selected mode	• Make sure you have selected
	of Programme AE with special	the mode of Programme AE
	effects was changed after the	with special effects you want
	last selected scene for editing	before starting editing ( pg.
	was registered.	38, 40).
15. The Picture Wipe and	15. • The last selected editing scene	15. • Select Picture Wipe or
Dissolve functions do not	is ending.	Dissolve before beginning
work.	• At the end of the last selected	recording. The effects are then
	scene for editing, the Power	automatically activated
	Switch was set to “OFF”.	( pg. 40).
	• The power is off.	• Do not turn off the
		camcorder’s power after
		setting Edit-In and Edit-Out
		points, as they will all be
		erased ( pg. 40).
		• The camcorder automatically
		shuts off after 5 minutes have
		elapsed in the Record-
		Standby mode. Make sure you
		continue operations within
		5 minutes after engaging
		Record-Standby mode
		( pg. 40).

CONTINUED ON NEXT PAGE