JVC GR-DVL810A 36 EN, Initialising a Memory Card, You can initialise a memory card anytime

Rotate the MENU/BRIGHT wheel to select

“FORMAT” and press it. The Confirmation Screen appears.

36 EN

MENU/BRIGHT Wheel

Lock Button

Power Switch

VIDEO/DSC Switch (Open the

LCD monitor to access this switch)

Display

I NDEX					Menu Screen
PROTECT
DELETE
DPOF			CANCEL
FORMAT
				EXECUTE
RETURN
	FOR	MAT
FORMAT			– CANCEL
				EXECUTE
ERASE AL L
EX I ST I NG				DATA?

D.S.C. PLAYBACK (cont.)

Initialising A Memory Card

You can initialise a memory card anytime.

After initialising, all images and data stored in the memory card, including those which have been protected, are cleared.

1 Set the VIDEO/DSC Switch to “ ”, then set the

Power Switch to “ ” while pressing down the Lock Button.

•A stored image is displayed.

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate the MENU/BRIGHT wheel to select “ MEMORY” and press it. The MEMORY Menu appears.

3

4 Rotate the MENU/BRIGHT wheel to select “EXECUTE” and press it. The memory card is initialised. When initialisation is finished, “NO IMAGES STORED” appears.

•To cancel initialisation, rotate the MENU/BRIGHT wheel to select “CANCEL” and press it.

CAUTION:

Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialisation. If the memory card becomes corrupted initialise it.