JVC GR-DVL610A, GR-DVL315A, GR-DVL810A, GR-DVL710A Using USB or PC connection cable, Using DV cable

68 EN	SYSTEM		CONNECTIONS
[A]Using USB or PC connection cable
	GR-DVL315A only
To PC	PC connection cable		To
(DIGITAL PHOTO)	(provided)		RS-232C
To USB	USB cable		To USB
	(provided)		connector
GR-DVL810A/DVL710A/DVL610A/DVL610SH only				PC
[B] Using DV cable	OR
Power Switch
Core filter		Core filter
To DV	DV cable		To DV
	(optional)		connector
VIDEO/DSC Switch (GR-DVL810A/DVL710A/DVL610A/				PC with DV
				connector
DVL610SH only; open the LCD monitor to access this switch.)

Connection To A Personal Computer

[A] Using USB or PC connection cable

This camcorder can transfer still images to a PC by using the provided software.

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 For GR-DVL810A/DVL710A/DVL610A/ DVL610SH Owners: If you are using the USB connection, set the VIDEO/DSC switch to “DSC”.

•Only the still images stored in the memory card can be transferred to a PC.

4 Turn the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●It is recommended to use the AC Adapter as the

power supply instead of the battery pack ( pg. 9).

●Never connect the USB or PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and provided Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

For GR-DVL810A/DVL710A/DVL610A/ DVL610SH Owners:

“USB MODE” and/or “ACCESSING FILE” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while

“ACCESSING FILE” is displayed on the LCD monitor since this can result in product damage.