JVC GR-DVL710A, GR-DVL315A, GR-DVL810A, GR-DVL610SH, GR-DVL610A specifications EN49

EN49

SYSTEM

DISPLAY

DEMO	OFF	Automatic demonstration will not take place.
MODE
	ON	Demonstrates certain functions such as Programme AE with special effects,
		etc., and can be used to confirm how these functions operate. When “DEMO
		MODE” is set to “ON” and the Menu Screen is closed, demonstration starts.
		Performing any operation during the demonstration stops the demonstration
		temporarily. If no operation is performed for more than 1 minute after that,
		the demonstration will resume.
		NOTES:
		● If a tape is in the camcorder, the demonstration cannot be turned on.
		● “DEMO MODE” remains “ON” even if the camcorder power is turned off.
		● If “DEMO MODE” remains “ON”, some functions will not be available.
		After viewing demo, set to “OFF”.
CAM	CANCEL	Does not reset all settings to the factory-preset.
RESET	EXECUTE	Resets all settings to the factory-preset.
ON	LCD	Keeps the camcorder’s display (except the date, time and time code) from
SCREEN		appearing on the connected TV screen.
	LCD/TV	Makes the camcorder’s display appear on screen when the camcorder is
		connected to a TV.
DATE/	OFF	The date/time does not appear.
TIME
	AUTO	Displays the date/time for approx. 5 seconds in the following cases:
		•When the Power Switch is set from “OFF” to “ ” or “ ”.
		•When video playback starts. The camcorder displays the date/time when
		scenes are recorded.
		•When the date is changed during video playback.
	ON	The date/time is always displayed.
TIME	OFF	Time code is not displayed.
CODE	ON	Time code is displayed on the camcorder and on the connected TV. Frame
		numbers are not displayed during recording.
CLOCK ADJ.		Allows you to set the current date and time ( pg. 11).

(GR-DVL810A/DVL710A/DVL610A/DVL610SH only)

DSC

QUALITY	Allows you to set the Picture Quality mode (FINE and STANDARD) depending on your
	preference ( pg. 14).
REC			When Snapshot recording is performed with the VIDEO/DSC Switch set to
SELECT			“VIDEO”, still images are recorded only onto the tape.
		/	When Snapshot recording is performed with the VIDEO/DSC Switch set to
			“VIDEO”, still images are recorded not only onto the tape but also in the
			memory card.

: Factory-preset

NOTES:

●“ SYSTEM” and “ DISPLAY” functions which are set when the Power Switch is set to “ ” are also applied when the Power Switch is set to “ ” (
pg. 50). “CLOCK ADJ.” only appears when the Power Switch is set to “ ”.

●The “ DISPLAY” settings are effective even when the Power Switch is set to “ ”.

●The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control (provided) (
pg. 23, 52, 62).