JVC TK-C1460B instruction manual Functions and set values Initial value, Area Edit

MENU SETTING
MOTION DETECT Screen
Settings are executed about the motion detecting function that emits alarm signals when
there exists any motion in the image. Alarm signals are output from the auxiliary terminals on
the back.
Item		Functions and set values	Initial value
MODE	This sets ON/OFF of motion detecting function.		OFF
	OFF:	Motion detecting function does not work.
	ON:	Motion detecting function works.
LEVEL	This sets the level that detects motion.		NORMAL
	If the item MODE is set to OFF, “- - -” will appear, and
	settings cannot be changed.
	To function with large signal level change…decrease the
	value
	To function with small signal level change…increase the
	value
	[Set values: –5 to NORMAL to 5]
AREA EDIT	This sets the range in which the motion detecting function		–
	works.
	( Page 37)

COMMUNICATION Screen
Settings are made for the control signal-connecting terminals on the back.
If the setting is changed, be absolutely sure to switch on the power again.
Item	Functions and set values	Initial value
STYLE	This sets a communication system according to the	P TO P
	system used.
	P TO P (Point to point)
	This is set when a remote control unit controls a camera.
	M.DROP (Multi-drop)
	This is set when a remote control unit controls a plural
	number of cameras.
MACHINE ID	This is set when the STYLE item is set to M.DROP. This	– – –
	is the number that identifies individual cameras in a group.
	No proper function can be realized if an ID number is
	repeated within a system.
	A combined use with the RM-P2580 necessitates the
	setting together with the video input number of the RM-
	P2580.
	If the item STYLE is set to P TO P, “- - -” will appear, and
	settings cannot be changed.
	[Set values: 1 to 99]

ALARM TIME This sets the output time of the alarm signal output of	10s
AUX terminal as well as “ALARM” display on the screen
when motion is detected.
If the item MODE is set to OFF, “- - -” will appear, and
settings cannot be changed.
[Set values: OFF, 5s, 6s, 7s, 8s, 9s, 10s, 15s, 20s, 30s,
1min]
MEMO
When the MODE item is set to OFF, only the alarm signal

MAINTENANCE Screen
White spot compensation is performed.
Item	Functions and set values
CCD SPOT	The white spots on the screen, which are characteristic
	for CCDs can be reduced.

Page 38 “White Spot Compensation”

Initial value –

	of the AUX terminal is output, and “ALARM” is not
	displayed on the screen.
DEMONSTRATION	This is used when checking and confirming the set motion	–
	detecting function. The detection area is shown in gray.
	( Page 37)

FACTORY SETTINGS Screen
Set values are returned to initial values.
Item		Functions and set values
FACTORY	The values set on the menu are returned to initial values.
SETTINGS	CANCEL	:	No return to the initial value.
	CLEAR	:	Returns set values except titles to the
	(WITHOUT TITLE)		initial value.
	CLEAR (ALL)	:	Returns all set values including titles
			to the initial value.
	Select respective set value and press the SET button.
	Then, “DATA CLEARED” will appear for about 3 seconds.
	Be sure not to switch off the power while the display is
	still on.
	MEMO
	However, when making settings by means of transmitted
	commands, the contents of the COMMUNICATION menu
	do not return to the factory settings.

Initial value –

E-32 E-33