[Back] [Next]
GETTING STARTED
Be sure to insert the
Inserting the Batteries
1.Slide the Battery/Memory card compartment door (located on the right side of the camera) in the direction indicated by the arrow to open it.
2.Insert the
3.Close back the door and turn on the camera.
Checking Batteries( 
: Full battery power)
The Battery Indicator will be displayed on the status LCD monitor while the camera is on. Depending on the durability and usage of the batteries, the number of pictures that can be recorded varies. Note that power is consumed by the following operations even when not recording, reducing the number of images that can be recorded.
zExtensive use of the LCD monitor in the Play/Erase mode.
zPerforming settings.
Notes:
zPlease ensure that the batteries are inserted in the correct way. Do not reverse the 
and 
polarities.
zThe recommended battery type is AA size ALKALINE.
zNever use manganese batteries.
zLow temperatures (under 0°C or 32°F) will reduce the output efficiency of the batteries, thereby shortening the operation time of the camera.
zThe use of Flash is not recommended when the battery level is low.
zNever mix old and new batteries.
zRemove the batteries if the camera is not to be used for an extended period of time, to prevent leaks or corrosion.
zBefore discarding batteries, cover the positive 
and negative 
terminals with adhesive tape.
zThe Battery Indicator reflects the level of remaining battery power. When the indicator appears as shown above, the batteries are weak and need to be replaced.
Attaching the Hand Strap or Neck Strap
Always use the provided hand strap or neck strap when carrying the camera. Please note that the company cannot be held responsible for any accidental drop of the camera due to improper use of the hand strap or neck strap.