JVC GR-D290 GR-D270 manual C. Recording EN, Approximate Number of Storable Images, Press Snapshot

D.S.C. RECORDING EN 25

Basic Shooting (D.S.C. Snapshot)			Approximate Number of Storable Images
			● The number increases or decreases depending
You can use your camcorder as a Digital Still				on the Picture Quality/Image Size, etc.
Camera for taking snapshots. Still images are				Image Size/Picture	SD Memory Card
stored in the memory card.				Quality	8 MB* 16 MB* 32 MB* 64 MB*
NOTE:			640 x 480/FINE		47	95	205	425
Before continuing, perform the procedures listed			640 x 480/STANDARD		160	295	625	1285
below:
			1024 x 768/FINE		21	47	95	200
● Power ( pg. 13)
● Loading a Memory Card ( pg. 17)			1024 x 768/STANDARD		65	145	310	640
		SNAPSHOT
		Power Switch		Image Size/Picture	MultiMediaCard
				Quality	8 MB** 16 MB* 32 MB*
		Lock Button	640 x 480/FINE		55	105		215
VIDEO/			640 x 480/STANDARD		190	320		645
MEMORY			1024 x 768/FINE		25		50	100
1 Remove the lens cap.			1024 x 768/STANDARD		75	160		320
			*	Optional
2 Open the LCD monitor fully. ( pg. 18)
			**	Provided (GR-D290 only)
3 Set the VIDEO/MEMORY Switch to			Interval Shooting
“MEMORY”.
4 Set the Power Switch to “	A	M	During Interval Shooting mode, the camcorder
		” or “ ” while	continues to take snapshots automatically with
pressing down the Lock Button located on the
switch.			an interval of your desired setting.
● To change the Image Size and/or Picture Quality,			1 Set “INT.SHOT” to “ON”. ( pg. 31, 35)
pg. 31, 34.
5 Press SNAPSHOT. The “O” indication			● “INTERVAL” and “ ” appear.
			2 Set “INT.TIME” to the desired shooting
appears while the snapshot is being taken.
● Still images are recorded in the snapshot mode			interval. ( pg. 31, 35)
			3 Set the Power Switch to “A” or “M” while
with no frame.
● To delete unwanted still images, refer to “Deleting			pressing down the Lock Button located on the
Files” ( pg. 29).			switch.
● When you do not want to hear the shutter sound,			4 Press SNAPSHOT.
set “BEEP” to “OFF”. ( pg. 31, 33)
NOTE:			● First shot is taken after 2 seconds.
			● The “O” indicator appears while the snapshot
If shooting is not performed for approx. 5 minutes				is being taken.
when the Power Switch is set to “A” or “M” and			● The clock icon “ ” turns while waiting for the next
power is supplied from the battery pack, the				shot is being taken.
camcorder shuts off automatically to save power. To			● The next shot is being taken automatically when
perform shooting again, push back and pull out the				the shooting interval set in step 2 has passed.
viewfinder again or close and re-open the LCD			5 Press SNAPSHOT to stop Interval Shooting.
monitor.

DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK

CONTINUED ON NEXT PAGE