JVC GR-D290 GR-D270 manual Normal Playback, Quick Review, Video Playback, Still Playback

Page 20

Set the VIDEO/MEMORY Switch to “VIDEO”.

20 EN

NOTES:

●The time code cannot be reset.

●During fast-forwarding and rewinding, the time code indication does not move smoothly.

●The time code is displayed only when “TIME CODE” is set to “ON”. ( pg. 34)

Quick Review

Enables to check the end of the last recording.

1)Press during the Recording-Standby mode.

2)Tape is rewound for about several seconds and played back automatically, then pauses in the Recording-Standby mode for the next shot.

● Distortion may occur at start of playback. This is normal.

Recording From The Middle Of A Tape

1)Play back a tape or use Blank Search

( pg. 21) to find the spot at which you want to start recording, then engage the Still Playback mode. (See the right column.)

2)Set the Power Switch to “A” or “M” while

pressing down the Lock Button located on the switch, then start recording.

VIDEO PLAYBACK

Normal Playback

5VOL. +/–

3Lock Button

4/9

Speaker	8
	M A
	Power
	Switch

MENU VIDEO/MEMORY

1 Load a cassette. ( pg. 16)

2

3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

4 To start playback, press 4/9.

5 To stop playback, press 8.

●During Stop mode, press 3 to rewind, or 5 to fast-forward the tape.

To control the speaker volume

Slide the Power Zoom Lever (VOL. +/–) towards “+” to turn up the volume, or towards “–”to turn down the volume.

NOTES:

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV.

( pg. 22)

●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “PLAY”.

●When a cable is connected to the S/AV connector, the sound is not heard from the speaker.

Still Playback

Pauses during video playback.

1)Press 4/9 during playback.

2)To resume normal playback, press 4/9 again.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.

Image 20

Contents Digital Still Camera D.S.C. Recording Dear CustomerFor Customer Use Model No Serial NoData Battery Wipe/Fader EffectsProgram AE with Special Effects LED LightSafety Precautions Important Safety Instructions References Index EN Getting StartedConnectors IndicatorsControls Other PartsDuring D.S.C. Recording Only IntervalBright NOVVolume During Video PlaybackDuring D.S.C. Playback MICBefore Using This Camcorder How To Attach The Shoulder Strap Provided AccessoriesHow To Attach The Lens Cap How To Attach The Core Filter Close the core filter until it clicks shutStopper Core filter Cm 1-3/16 Wind oncePower Charging The Battery PackUsing The Battery Pack Maximum continuous recording timeOperation Mode Data Battery SystemUsing AC Power About BatteriesGrip Adjustment Language SettingsDate/Time Settings Power-Linked OperationViewfinder Adjustment Brightness Adjustment Of The DisplayTripod Mounting Loading/Unloading a CassetteCard To protect valuable recordingsClose the card cover To protect valuable files available only for SD Memory CardBasic Recording EN Video RecordingTape Remaining Time LCD Monitor And ViewfinderZooming Journalistic Shooting Time CodeZoom Zoom OutTo control the speaker volume Normal PlaybackQuick Review Video PlaybackBlank Search Video Playback ENShuttle Search EN Video Playback If using a VCR, go to . If not, go to stepTo AV connector Open the cover Audio/Video cable provided Installing The Battery Control GR-D290 onlyBeam Effective Area indoor use Buttons And FunctionsPlayback Zoom Playback Special EffectsFrame-By-Frame Playback Press Snapshot C. Recording ENApproximate Number of Storable Images To cancel Interval Shooting mode Normal Playback Of ImagesC. Playback Playback Zoom GR-D290 onlyAuto Playback Of Images Index Playback Of FilesRemoving On-ScreenDisplay C. Playback ENResetting The File Name Protecting Files Tape To a Memory CardTo protect the currently displayed file MenuTo Remove Protection Setting Print Information Dpof SettingDeleting Files EN Additional Features for D.S.C To Reset The Number Of PrintsInitializing a Memory Card EXECUTE, and pressMenus with Sub Menus Menus for Detailed Adjustment ENMenus without Sub Menus EN Menus for Detailed Adjustment Recording MenusRemote Wide Mode Demo ModeBeep Tele MacroCAM Reset PriorityLanguage Clock ADJPlayback Menus Blank Srch OFF / LCD / LCD/TVDATE/TIME OFF / Auto / onTo take a snapshot in the 5-second recording mode LED LightLive Slow Second RecordingSnapshot For Video Recording EN Features for RecordingNight-Alive Exposure Control Iris Lock To return to automatic exposure controlTo return to automatic iris control To lock the exposure control and the irisSpot Exposure Control White Balance AdjustmentBacklight Compensation Wipe Or Fader Effects To deactivate the selected effectSports Variable Shutter Speed 1/250 1/4000Shutter 1/250/ Shutter 1/500 Shutter 1/1000*/ Shutter 1/2000Dubbing To a VCR Editing ENTo use this camcorder as a player Following the illustrations, connectDigital Dubbing EN EditingDubbing To Or From a Video Unit To use this camcorder as a recorderUsing USB cable B Using DV cable Using USB cableUsing DV cable Insert Editing GR-D290 only To end Audio Dubbing, press Pause 9, then StopPress START/STOP to begin editing To end Insert Editing, press START/STOP, then StopTroubleshooting EN PowerAdvanced features Video and D.S.C. RecordingEN Troubleshooting Other problemsUSE Cleaning Cassette Check TAPE’S Erase Protection TABCONDENSATION, Operation Paused Please Wait TapeDUB Error Insert ErrorCard Error Check CARD’S Write Protection SwitchCleaning The Camcorder User Maintenance ENUnit in Safeguard Mode Remove and Reattach Battery Unit in Safeguard Mode Eject and Reinsert TapeBattery Packs Using Household AC Plug AdapterEN Cautions AC AdapterMemory Cards LCD MonitorMain Unit NotHow To Handle a CD-ROM Declaration of ConformityAbout moisture condensation Serious malfunctioningCamcorder ReferencesRecording Capacity Dpof SettingTerms