Protecting Files Tape To a Memory Card, Menu

28 EN

ADDITIONAL FEATURES FOR D.S.C.

Dubbing Still Images Recorded On

Protecting Files

A Tape To A Memory Card

The Protect mode helps prevent the accidental

erasure of files.

Still images can be dubbed from a tape to a

1 Perform steps 1 – 3 in “Normal Playback Of

memory card.

1 Load a cassette. ( pg. 16)

Images” ( pg. 26).

2 Press MENU. The Menu Screen appears.

2 Load a memory card. ( pg. 17)

3 Press + or – to select “PROTECT”, and press

3 Set “SNAP/SLOW” to the desired mode.

MENU. The Sub Menu appears.

(except “SLOW”, pg. 31, 32)

To protect the currently displayed file

4 Set the VIDEO/MEMORY Switch to “VIDEO”.

4 Press + or – to select

5 Set the Power Switch to “PLAY” while

“CURRENT”, and press

pressing down the Lock Button located on the

MENU. The PROTECT

PROTECT

CURRENT

switch.

PROT . ALL

screen appears.

CANC . ALL

6 Set “

COPY” to “ON”.

5 Slide the Power Zoom

RETURN

( pg. 31, 35)

Lever towards “T” or “W”

7 Press 4/9 to start playback.

to select the desired file.

8 At the point you want to dub, press 4/9

6 Press + or – to select

again to engage Still Playback.

“EXECUTE”, and press

PROTECT

9 To dub the image, press SNAPSHOT.

MENU.

● The “

” indication appears during dubbing.

● To cancel protection,

PROTECTED

select “RETURN”.

NOTES:

● Repeat steps 5 and 6 for W

RETURN

● To use Playback Special effects with a video

all files you want to

image you wish to dub, perform up to step 9 using

protect.

the remote control (provided with GR-D290 only).

To protect all files stored in the memory card

( pg. 24)

● Images are dubbed in 640 x 480 pixels.

4 Press + or – to select “PROT.ALL”, and press

Resetting The File Name

MENU. The PROTECT screen appears.

5 Press + or – to select “EXECUTE”, and press

MENU.

By resetting the file name, a new folder will be

● To cancel protection, select “RETURN”.

made. The new files you are going to make will

NOTES:

be stored in the new folder. It is convenient to

separate the new files from previously made

● If the “ ” mark appears, the currently displayed

files.

file is protected.

1 Perform steps 1 – 3 in “Normal Playback Of

● When the memory card is initialized or corrupted,

even protected files are deleted. If you do not want

Images” ( pg. 26).

to lose important files, transfer them to a PC and

2 Press MENU. The Menu Screen appears.

save them.

3 Press + or – to select “NO. RESET”, and press MENU. The NO. RESET screen appears.

4 Press + or – to select “EXECUTE”, and press MENU. The new folder (such as “101JVCGR”) will be made and the file name of the next shot starts from DVC00001.

NOTE:

If the file name reaches DVC09999, a new folder (such as “101JVCGR”) will be made and the file name will start again from DVC00001.