JVC GR-D290 GR-D270 manual Important Safety Instructions

Page 4

4 EN

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear).

Do not block the ventilation holes.

(If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)

No naked flame sources, such as lighted candles, should be placed on the apparatus.

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

The apparatus shall not be exposed to dripping or splashing.

Do not use this equipment in a bathroom or places with water.

Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups etc.) on top of this unit. (If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.

CAUTION!

The following notes concern possible physical damage to the camcorder and to the user.

When carrying, be sure to always securely attach and use the provided strap. Carrying or holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction.

Take care not to get your finger caught in the cassette holder cover. Do not let children operate the camcorder, as they are particularly susceptible to this type of injury.

Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder.

CAUTION!

Connecting cables (Audio/Video, S-Video, etc.) to the camcorder and leaving it on top of the TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage.

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Only use attachments/accessories specified by the manufacturer.

10.Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus. When a

cart is used, use caution when

moving the cart/

apparatus combination to avoid injury from tip- over.

11.Unplug this apparatus during lightning storms or when unused for long periods of time.

12.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Image 4
Contents Digital Still Camera D.S.C. Recording Dear CustomerFor Customer Use Model No Serial NoData Battery Wipe/Fader EffectsProgram AE with Special Effects LED LightSafety Precautions Important Safety Instructions References Index EN Getting StartedConnectors IndicatorsControls Other PartsDuring D.S.C. Recording Only IntervalBright NOVVolume During Video PlaybackDuring D.S.C. Playback MICBefore Using This Camcorder How To Attach The Lens Cap Provided AccessoriesHow To Attach The Shoulder Strap How To Attach The Core Filter Close the core filter until it clicks shutStopper Core filter Cm 1-3/16 Wind oncePower Charging The Battery PackUsing The Battery Pack Maximum continuous recording timeOperation Mode Data Battery SystemUsing AC Power About BatteriesGrip Adjustment Language SettingsDate/Time Settings Power-Linked OperationViewfinder Adjustment Brightness Adjustment Of The DisplayTripod Mounting Loading/Unloading a CassetteCard To protect valuable recordingsClose the card cover To protect valuable files available only for SD Memory CardBasic Recording EN Video RecordingTape Remaining Time LCD Monitor And ViewfinderZooming Journalistic Shooting Time CodeZoom Zoom OutTo control the speaker volume Normal PlaybackQuick Review Video PlaybackShuttle Search Video Playback ENBlank Search To AV connector Open the cover Audio/Video cable provided If using a VCR, go to . If not, go to stepEN Video Playback Installing The Battery Control GR-D290 onlyBeam Effective Area indoor use Buttons And FunctionsFrame-By-Frame Playback Playback Special EffectsPlayback Zoom Approximate Number of Storable Images C. Recording ENPress Snapshot To cancel Interval Shooting mode Normal Playback Of ImagesC. Playback Playback Zoom GR-D290 onlyAuto Playback Of Images Index Playback Of FilesRemoving On-ScreenDisplay C. Playback ENResetting The File Name Protecting Files Tape To a Memory CardTo protect the currently displayed file MenuDeleting Files Setting Print Information Dpof SettingTo Remove Protection EN Additional Features for D.S.C To Reset The Number Of PrintsInitializing a Memory Card EXECUTE, and pressMenus without Sub Menus Menus for Detailed Adjustment ENMenus with Sub Menus EN Menus for Detailed Adjustment Recording MenusRemote Wide Mode Demo ModeBeep Tele MacroCAM Reset PriorityLanguage Clock ADJPlayback Menus Blank Srch OFF / LCD / LCD/TVDATE/TIME OFF / Auto / onTo take a snapshot in the 5-second recording mode LED LightLive Slow Second RecordingNight-Alive EN Features for RecordingSnapshot For Video Recording Exposure Control Iris Lock To return to automatic exposure controlTo return to automatic iris control To lock the exposure control and the irisBacklight Compensation White Balance AdjustmentSpot Exposure Control Wipe Or Fader Effects To deactivate the selected effectSports Variable Shutter Speed 1/250 1/4000Shutter 1/250/ Shutter 1/500 Shutter 1/1000*/ Shutter 1/2000Dubbing To a VCR Editing ENTo use this camcorder as a player Following the illustrations, connectDigital Dubbing EN EditingDubbing To Or From a Video Unit To use this camcorder as a recorderUsing DV cable Using USB cableUsing USB cable B Using DV cable Insert Editing GR-D290 only To end Audio Dubbing, press Pause 9, then StopPress START/STOP to begin editing To end Insert Editing, press START/STOP, then StopTroubleshooting EN PowerAdvanced features Video and D.S.C. RecordingEN Troubleshooting Other problemsUSE Cleaning Cassette Check TAPE’S Erase Protection TABCONDENSATION, Operation Paused Please Wait TapeDUB Error Insert ErrorCard Error Check CARD’S Write Protection SwitchCleaning The Camcorder User Maintenance ENUnit in Safeguard Mode Remove and Reattach Battery Unit in Safeguard Mode Eject and Reinsert TapeBattery Packs Using Household AC Plug AdapterEN Cautions AC AdapterMemory Cards LCD MonitorMain Unit NotHow To Handle a CD-ROM Declaration of ConformityAbout moisture condensation Serious malfunctioningCamcorder ReferencesTerms Dpof SettingRecording Capacity