3 0min 
29 min
REC
1 min |
| blinking |
|
|
| 2 min |
| blinking |
| 3 min |
|
|
|
|
|
|
0 min blinking
Tape Remaining Indicator
The time remaining on the tape is automatically monitored and displayed in the viewfinder (☞ pg. 60). When the tape ends, “TAPE END” appears in the viewfinder.
Stable Shooting Positions
Before pressing RECORDING START/ STOP, ZOOM or SNAP SHOT, be sure to hold the camcorder with both hands.
Feet set slightly apart with your body turned toward the subject
For low shooting
EN 21
STOP PLAY /PAUSE
RE SHOOT
CAN.
Re Shoot A Scene
If you aren’t pleased with a scene you just recorded (after having checked it in the viewfinder), you can easily return to the beginning and record it again.
1 ENGAGE RECORD/STANDBY MODE Press RECORDING START/STOP, then press RE SHOOT. The tape returns automatically to the starting point of the most recent recording, and the camcorder enters RECORD/STANDBY mode.
•If, after the tape has rewound to the beginning of the scene, you decide you don’t need to
Fasten hand strap around wrist
Lean against a wall or pole for support