JVC YU30052-625-1 manual Engagemode Vcrs RECORD-PAUSE, Start Editing, Stop Editing

EN 53

	1 WH	I N		OUT	MODE
		00	: 25 ~ 02 : 05		P
	2	P 07	: 18 ~ 08 : 31
	3	03	: 33 ~ 05 : 53		B/W
	4	09	: 30 ~ 13 : 15
	5	15	: 55 ~	:
	6		~
	7		~
	8		~	15 : 55
FF	T I ME CODE
REW	TOT AL			09 : 02
	R.A.EDIT PROGRAM SCREEN
STOP
EDIT
	RM-V708U
T W	(provided)

FADE/WIPE

EFFECT

EDIT IN/OUT

VCR RECORD/STANDBY

9 PREPARE SOURCE TAPE Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE.

10 ENGAGEMODE VCR'S RECORD-PAUSE

Point the remote control toward the VCR's infrared sensor and press VCR RECORD/ STANDBY, or manually engage the VCR's Record-Pause mode.

11 START EDITING

Press EDIT on the Docking Station. Editing proceeds as programmed, right through to the end of the last registered scene.

•If you selected a Fade/Wipe effect, it is active between selected scenes during dubbing.

•If you selected a P.AE/Effect, it is active during scenes while dubbing.

•When dubbing is complete, the camcorder enters the PAUSE mode, and the recorder enters its RECORD/STANDBY mode.

•If you don’t register an Edit-Out point, the tape will be dubbed all the way to the end automatically.

12 STOP EDITING

Engage the STOP modes for the camcorder and the recorder.

NOTES:

●During dubbing, make sure the remote control is pointed at the recorder’s sensor, and that the path between the two is unobstructed.

●If, during dubbing, you press a button on the camcorder, its RECORD/STANDBY mode is automatically engaged.

●Random Assemble Editing may not function

properly when using a tape including several duplicated Time Codes. ((☞ pg. 26)

●When using MOSAIC FADER, black bars may appear at the bottom and left of the screen.