JVC YU30052-625-1 manual Scene, Select Mode, To Take a Snapshot In The 5-Second Mode, Standby

24EN

RECORDING

Advanced Features (Cont.)

STANDBY

Dissolve in the 5-Second mode

Select “5SD” at the System Menu (☞ pg. 18). “5SD MODE” appears in the viewfinder in step 2 below. Record one 5-second clip, and the image at the end of the clip is stored. If you record the next clip within 5 minutes, the previous scene dissolves as the new scene appears.

* If you turn the power off, the stored image will be lost.

PLAY OFF REC

5S

RECORDING START/STOP BUTTON

VIEWFINDER

REC

5 S MODE

After 5 sec.

PAUSE

5 S MODE

RECORD/STANDBY

Scene

Record a vacation or an important event in 5-second clips to keep the action moving. The 5-Second function may also be activated during Full Auto operation. While the 5-Second mode is activated, Fade/ Wipe (☞ pg. 28), P.AE/Effects (☞ pg. 33) and other manual operations cannot be performed.

1 PULL OUT VIEWFINDER

Align its mark to “STANDBY”. The lens cover opens automatically.

2 SELECT MODE

Set the Power Dial to “5S” and press RECORD- ING START/STOP. “5S MODE” appears in the viewfinder, the tally lamp lights to indicate the start of recording, and after 5 seconds the camcorder enters RECORD/STANDBY mode.

•If you press and hold RECORDING START/ STOP within 5 seconds after recording starts, RECORD/STANDBY is not engaged.

3 END 5-SECOND MODE RECORDING When you’re done, set the Power Dial to the “REC” or “OFF” position.

To Take A Snapshot In The 5-Second Mode . . .

..... instead of pressing RECORDING START/STOP

in step 2, press SNAPSHOT. The camcorder records a 6-second still with the shutter sound, but without the white border.