JVC KY-F560 Set value starts blinking and adjustment is possible, Variable Values -128 +127

White Shading Adjustment (continued)

5. 6.			Blinking	5. Use the [ / ] buttons to select items for “LEVEL(R)”,
				“LEVEL(G)” and “LEVEL(B)”, then press the [SET] button.
- - -WH I TE	BA LANCE - - -
				The set value starts blinking and adjustment is possible.
WH I TE BA LANCE		MANUAL
LEVEL ( R )		0		6. Refer to the monitor to adjust values for “LEVEL(R)”,
LEVEL ( B )		0
S H AD I NG		MANUAL		“LEVEL(G)” and “LEVEL(B)” using the [ / ] buttons.
LEVEL ( R )		0
LEVEL ( G )		0		As each of the set values get bigger, the colour at the lower
LEVEL ( B )		0
PAGE BACK				end of the screen lightens while that at the upper end darkens.
				{Variable Values: –128 - +127}
				7. Upon changing the set values, press the [SET] button to record
				them in the memory of this unit.
7.				8. Press the [MENU] button for 1-2 seconds.
- - -WHI TE	BA LANCE - - -			The normal screen will be displayed.
WH I TE BA LANCE		MANUAL		9. Upon completing white shading adjustment, perform white bal-
LEVEL ( R )		0
LEVEL ( B )		0
				ance adjustment again.
S H AD I NG		MANUAL
LEVEL ( R )		1 0		☞ Page 20 ‘White Balance Adjustment’
LEVEL ( G )		0
LEVEL ( B )		0
PAGE BACK

English

E-23