JVC KY-F560 instruction manual Shutter, Scan, Eei, Advanced, Exposure, Back

5. Setting Via the Menu Screen (continued)

“EXPOSURE” Screen (continued)

Settings in bold are factory settings

	Item			Function/Variable Values
“SHUTTER”		For switching the shutter mode.
		“STEP”	: Shutter speed can be altered using the “LEVEL” item.
		“V.SCAN”	: Align scan speed of monitor to eliminate horizontal lines that
			appear when shooting the computer monitor. Shutter can be
			fine-tuned using the “LEVEL” item.
			☞ Page 24 ‘Shooting the Computer Monitor’
		“EEI”	: Adjusts shutter speed automatically according to brightness
			of object. (Maximum value: 1/960)
			Set the maximum value at the “EEI LIMIT” item. ☞ Page 33
	“LEVEL”	{Variable “STEP” Values : NORMAL (1/50), 1/120, 1/250, 1/500, 1/1000, 1/2000,
				1/4000, 1/10000}
		{“V.SCAN” variable		: approx. 1/50 ~ approx. 1/10000}
		Notes
		• When “SHUTTER” is set to “EEI”, “LEVEL” item selection will be disabled. (Dis-
		played as “- - - - - -”)
		• There will be insufficient light intensity if the shutter speed is increased and
		adjustment of lens iris and gain will be necessary. Attention shall be paid to the
		picture quality when gain boost is increased as this increases the sensitivity
		and screen may become grainy as a result.
	“ADVANCED	Invokes the “ADVANCED EXPOSURE” screen.
EXPOSURE”		☞ Page 33 ‘“ADVANCED EXPOSURE” Screen’
“PAGE BACK”		Press the [SET] button to return to the “MENU” screen when cursor is at this
		position.

E-32