JVC KY-F560 instruction manual White Balance Screen, Auto

5. Setting Via the Menu Screen (continued)

“WHITE BALANCE” Screen

Settings in bold are factory settings

	Item		Function/Variable Values
“WHITE		For setting the white balance mode.
BALANCE”		“AUTO 1”	: Set to this to enable automatic adjustment of white balance.
		“AUTO 2”	AUTO 2 Equipped with 2 modes (“AUTO 1” and “AUTO 2”).
			☞ Page 20 ‘White Balance Adjustment’
			“LEVEL(R)” and “LEVEL(B)” items allow fine-tuning of white
			colour upon achieving white balance.
		“FAW”	: Automatic adjustment of white balance according to different
			illumination conditions.
		“MANUAL”	: Manual adjustment of white balance.
			Can be altered using the “LEVEL(R)” and “LEVEL(B)” items.
		“PRESET”	: Fixes white balance at 3200 K.
	“LEVEL(R)”	For adjusting the reddishness of white balance when “WHITE BALANCE” is set to
		“AUTO” or “MANUAL”.
		Increase value	: Increases reddishness on screen.
		Decrease value	: Decreases reddishness on screen.
		{Variable Values During “AUTO”: –32 - 0 - +31}
		{Variable Values During “MANUAL”: 0 - 128 - 255}
	“LEVEL(B)”	For adjusting the bluishness of white balance when “WHITE BALANCE” is set to
		“AUTO” or “MANUAL”.
		Increase value	: Increases bluishness on screen.
		Decrease value	: Decreases bluishness on screen.
		{Variable Values During “AUTO”: –32 - 0 - +31}
		{Variable Values During “MANUAL”: 0 - 128 - 255}

Note

Selection of “LEVEL(R)” and “LEVEL(B)” items is disabled when the “WHITE BALANCE” item is set to

“PRESET”. (Displayed as “- - - - - -”)

E-34