EN
15
|
| Shoulder Strap Attachment |
|
| ATTACH STRAP |
|
| Following the illustration at left, thread the strap |
2 |
| 1 through the top of the eyelet 1, then fold it back |
| and thread it through the buckle 2. Repeat the | |
1 | 1 | procedure to attach the other end of the strap to the |
| other eyelet 3, making sure the strap isn’t twisted. | |
|
| |
3 |
| ADJUST LENGTH |
|
| 2 Adjust as shown in the illustration at left 1. |
Tripod Mounting
ALIGN AND TIGHTEN
1 Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a