JVC GR-AXM100 manual Journalistic shooting, Interface shooting, Brightness control

EN19

Journalistic shooting

In some situations different angles of shooting may be required for more dramatic results.

OPEN LCD MONITOR

1 Make sure the LCD monitor is fully open.

	TILT LCD MONITOR
	Tilt the LCD monitor in the most convenient
	2 direction.
	•The LCD monitor can rotate almost full circle
	(270°: 90° downward, 180° upward).
	Interface shooting
	A person you shoot can view himself/herself in the LCD
	monitor, and you can even shoot yourself while viewing
	your own image in the LCD monitor.
	TILT LCD MONITOR UPWARD
	Open the LCD monitor and tilt it upward to 180
	1 degrees so that it faces forward.
	•When the LCD monitor is tilted upward to an
	angle of over approx. 105 degrees, the monitor
	image is inverted vertically, and the viewfinder
	also switches on.
	START RECORDING
	Point the lens toward the subject (yourself when
Self-recording	2 self-recording) and start recording.
	•During Interface Shooting, the monitor image and
	indications do not appear inverted as they would
	when viewing a mirror.
	NOTE:
	During Interface Shooting, indications other than the
	Date/Time display and Title display do not appear in the
	viewfinder.
	Brightness control
	You can adjust the brightness of the LCD monitor by
	turning the BRIGHT Dial.
	ADJUST BRIGHTNESS
	If you want to brighten the image . . .
	1 Turn the Dial toward “+”.
BRIGHT Dial	If you want to darken the image . . .
	Turn the Dial toward “–”.