JVC GR-AXM100 manual Using the battery pack, To remove the battery pack

QUICKOPERATIONGUIDEEN5

SUPPLY POWER	INSERTING A VIDEO
Hook on.	CASSETTE
1	PUSH	EJECT
2 Push in.		2
	4	3

BATT. RELEASE

Using the battery pack

1Hook-on the battery pack’s top end to the camcorder. (Charging procedure, ☞ pg. 8)

2Push in the battery pack until it locks into place.

To remove the battery pack

Slide BATT. RELEASE and pull out the battery pack.

1Open

1 Open the LCD monitor to an angle of over 45 degrees.

2Press EJECT to open the cassette holder.

3 Insert a video cassette.

4 Press PUSH to close the cassette holder. (For more details, ☞ pg. 13)

PLAYBACK

PLAY/PAUSE 3

1	2
	REW
Set to “PLAY”	STOP

1Set the Power Switch to “PLAY”.

2Press REW.

—The tape will automatically stop at the beginning of the tape.

3Press PLAY/PAUSE.

—Playback starts and the playback picture

appears.

•To stop playback, press STOP. (For more details, ☞ pg. 36.)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 45 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 45 degrees.

Or simply play back the tape on a VHS VCR using the Cassette Adapter (VHS Playpak). ☞ pg. 39

SHOOTING

	1
	LENS COVER
	Open/Close Switch
	3
	Recording
2	Start/Stop Button
Set to
“CAMERA”

1Slide the LENS COVER Open/Close Switch to open the lens cover.

2Set the Power Switch to “CAMERA”.

— The power indicator will light and an

image will appear.

3Press the Recording Start/Stop Button.

— Recording starts.

•To stop recording temporarily, momentarily press the Recording Start/Stop Button once

again.

(For more details, ☞ pgs. 16 – 19)

•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 45 degrees.

•The LCD monitor turns on/off when it is opened/closed at approx. 45 degrees.