JVC GR-AXM900 manual Picture Mode Setting Menu, Select Function, SET Picture Mode, Close Menu

EN49

Select Dial MENU Jog Dial

Set to “D.S.C.”

LCD monitor or viewfinder

	MENU
4MENU END		AUTO
FOCUS
EXPOSURE		AUTO
DATE TIME		DEC 25. 98
TELE MACRO		OFF
PICTURE		FINE
M. W. B.		AUTO
ZOOM SPEED		FAST
4NEXT

Menu Screen

PICTURE

FINE

STANDARD

EXIT

Picture Mode Setting Menu

FEATURE:

PURPOSE:

OPERATION:

Picture Mode Setting

There are two image settings you can choose from when storing in the camcorder’s memory: FINE and STANDARD. You can select either according to your needs.

1)ACCESS MENU SCREEN Turn the Select Dial to any position except AUTO LOCK. Press the MENU Jog Dial.

2)SELECT FUNCTION

Rotate the MENU Jog Dial to move the highlight bar to “PICTURE”, then press it. The Picture Mode Setting Menu appears.

3)SET PICTURE MODE

Rotate the MENU Jog Dial to move the highlight bar to the desired setting (FINE or STANDARD).

■Factory-preset is “FINE”.

■If you want the Picture Mode to return to the previous setting, rotate the MENU Jog Dial to move the highlight bar to “EXIT”.

4)CLOSE MENU

Press the MENU Jog Dial. The Menu Screen reappears and the highlight bar is on “MENU END”. Then press the MENU Jog Dial again to close the Menu Screen. “STD” is displayed with STAND- ARD selected, and “FINE” is displayed with FINE selected.

NOTES:

●To store the still images you shot, we recommend that you transfer them to a computer and save them on disk (☞ pg. 63).

●When the Power Switch is set to “CAMERA” and the LCD monitor is opened at an angle of 45 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power. When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this happens, we recommend that you use the viewfinder.

●When the remaining number indicator displays “0” (blinking), it is not possible to continue storing

pictures until you delete some shots to make room for new ones. Perform “DELETE” function in the Menu Screen to remove pictures you do not need (☞pg. 60).

●The Picture Mode can be switched to either “FINE”or “STANDARD”. Since the remaining number of shots available depends on the selected Picture Mode, switching the Picture Mode will vary this number.

●The LENS COVER warning blinks for approx. 5 seconds when the camcorder is turned on when the cover is closed.

●When the SNAPSHOT Button is pressed with the System Select Switch set to “VIDEO”, the picture is

stored not only in the camcorder's built-in memory but also onto the tape (if a tape is in the camcorder) (☞ pg. 26).

●When you shoot in a dark environment, the still image will become coarse and its true colors will be lost.