JVC GR-AXM900 manual Basic Shooting, Select Picture Mode, Mode Snapshot

48EN

DIGITALSTILLCAMERA(D.S.C.)SHOOTING

MODE SNAPSHOT

Basic Shooting

When shooting a still image, it is not recorded onto the tape, but it is stored in the camcorder's built-in memory in the selected Picture Mode. A stored still image data can be transferred to a PC, saved, and processed using a Paint Software program (☞ pg. 63). A still image processed on the PC can be also inserted onto a tape (☞ pg. 71).

SELECT MODE

Set to “D.S.C.”

LCD monitor or viewfinder

P

1 Slide the LENS COVER Open/Close Switch to open the lens cover, then set the System Select Switch to “D.S.C.”. Set the Power Switch to “CAMERA”.

•The power indicator lights and an image appears.

SELECT PICTURE MODE

2 Set “PICTURE” to “FINE” or “STANDARD” in the Menu Screen (☞ pg. 49) as required.

To select in the Full Auto mode . . .

.... turn the Select Dial to AUTO LOCK. Go to step 4.

No display P

(Full) (Pin-Up)

Pin-Up

A still image on a white background. A shadow effect is added to give it a three dimensional feel.

To shoot using various functions . . .

.... turn the Select Dial to any position except

AUTO LOCK. Go to step 3.

•There are two modes: FINE allows you to shoot up to approx. 22 still images with higher resolution, and STANDARD allows you to shoot up to approx. 44 still images with lower resolution.

SELECT SNAPSHOT MODE

Pictrue mode display

FINE 12

Full

A still image that occupies the entire image field is stored.

Remaining number of shots

2221 1 0

(Blinking)

3 Press the MODE Button to switch from one mode to the other until the desired setting appears as shown in the illustration to the left.

SHOOT

4 Press the SNAPSHOT Button.

•A still image is stored in the built-in memory and displayed for approx. 2 seconds. While the still image remains displayed, that image is in the process of being stored in memory, and it is therefore impossible to take another shot during that time. When the still image disappears and the scene you are currently aimed at appears on the screen, you may take another shot.

•The remaining number of shots available is displayed.

NOTES:

●The remaining number of shots varies according to the selected Picture Mode. In the “STANDARD” mode, twice as many still images can be shot as in the “FINE” mode.

●Six sample images have been stored in the built-in memory at the factory.

If you wish to delete them, first remove the “Protect” function (☞ pg. 59), then perform the “Delete” function (☞ pg. 60)