JVC GR-AXM900 C. Playback Connection, Connect to Personal Computer, RUN Image Transfer SOFT- Ware

D.S.C.PLAYBACKConnection

EN63

Connection to a Windows® PC/Macintosh®

Image data stored in the camcorder's built-in memory can be transferred to a Windows® PC or Macintosh® and saved using the provided image transfer software. The image data transferred to a personal computer can also be further processed using Paint Software, and the still image processed on the PC can be inserted onto a tape (☞ pg. 71).

Set to “D.S.C.”

For Macintosh®: To Modem Port or Printer Port

To DIGITAL jack (8-pin)

PC connection cables (provided)

For Windows®: To COM Port (RS-232C)

CONNECT TO PERSONAL

COMPUTER

1 Connect the camcorder’s DIGITAL jack to the COM Port (RS-232C) on a Windows PC or to the Modem Port/Printer Port (8-pin) on a Macintosh, using the provided PC connection cable.

SELECT MODE

2 Set the System Select Switch to “D.S.C.”, then set the Power Switch to “PLAY”.

•A still image stored in memory appears. •When transferring still images to a computer, be

sure that a still image is displayed on the screen.

RUN IMAGE TRANSFER SOFT- WARE

3 Launch the provided software on your Windows® PC or Macintosh®. Transfer the still images stored in the camcorder’s memory to the Windows® PC or Macintosh®. Refer to the software’s instruction manual on the provided CD-ROM for details.

•During transfer of the still image, the camcorder’s screen becomes blue and “PCMODE” is dis- played. After transferring is finished, the screen displays the same still image as in step 2.

LCD monitor or viewfinder

PCMODE

NOTES:

END TRANSFERRING

4 Close the software, then switch off the camcorder.