JVC GR-D90 GR-D70 Press Blank Search, To cancel Blank Search midway, Tape Playback

Page 15

6

7

%

5

8

 

4 Speaker

u

NOTES:

●If Stop mode continues for 5 minutes when power is

supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch u to “OFF (CHARGE)”, then to “PLAY”.

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV ( pg. 16).

●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.

●LCD monitor/viewfinder indications:

When power is supplied from a battery: the “

” battery

pack remaining power indicator is displayed.

 

When power is supplied from an AC outlet: “

” does

not appear.

 

●When a cable is connected to the AV connector, the sound is not heard from the speaker.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.

●When 4/67 is pressed to engage still playback, the image may not pause immediately while the camcorder stabilises the still image.

Blank Search

Helps you find where you should start recording in the middle of a tape to avoid time code interruption

( pg. 14).

1 Load a tape ( pg. 9).

2 Set the VIDEO/MEMORY Switch 4 to “VIDEO”, then set the Power Switch u to “PLAY” while pressing down the Lock Button y located on the switch.

3 Press BLANK SEARCH *.

•“BLANK SEARCH” Q appears and the camcorder automatically starts reverse or forward shuttle search, then stops at the spot which is about

3 seconds of tape before the beginning of the detected blank portion.

To cancel Blank Search midway . . .

..... press 55.

NOTES:

●In step 3, if the current position is at a blank portion the camcorder searches in the reverse direction, and if the current position is at a recorded portion the camcorder searches in the forward direction.

●Blank Search does not work if “HEAD CLEANING REQUIRED. USE CLEANING CASSETTE” has appeared with the tape.

●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.

●A blank portion which is shorter than 5 seconds of tape may not be detected.

●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.

*

y

u

EN

TAPE PLAYBACK 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GR-D90 GR-D70 Contents Safety Precautions Before recording an important scene Make sure the arrow is Pointing upward Stopper Wind onceSub Menu Using AC Power PowerCharging the Battery Pack Using the Battery PackAbout Batteries Grip AdjustmentViewfinder Adjustment Lithium-ion is vulnerable in colder temperaturesLoading/Unloading a Cassette Approximate recording time Tape Recording modeShoulder Strap Attachment Tripod MountingDate/Time Settings Recording Mode SettingScreen closes Display Loading a Memory Card Picture Quality/Image Size SettingTo Unload a Memory Card Label Clipped edge Memory cardTo Adjust The Brightness Of The Display Basic RecordingTape Recording Self-Recording Operation ModePower-Linked Operation Journalistic ShootingNormal Playback To Control The Speaker VolumeTime Code Recording from the Middle of a TapeTape Playback To cancel Blank Search midwayBlank Search Press Blank SearchConnections If using a VCR . . . go to step If not . . . go to stepTo Protect Valuable Files available only for SD Memory Card Basic Shooting SnapshotTo Delete Unwanted Still Images To Remove The Shutter SoundApproximate Number of Storable Images MultiMediaCardTo Magnify The Stored Images Removing On-Screen Display Viewing File InformationAuto Playback Index PlaybackAdvanced Features Protecting Files Deleting FilesTo Remove Protection To Print ALL Still Images ONE Print for Each Setting Print Information Dpof SettingTo Reset The Setting Dubbing Still Images Recorded On a Tape To a Memory CardFolder and File names To Reset The No. Of PrintsInitialising a Memory Card Making a New FolderProgramme AE With Special Effects Night-ScopeFade/Wipe Effects Auto Focus Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingTo Brighten The Subject Quickly Manual FocusExposure Control To Return To Automatic Exposure ControlWhite Balance Adjustment Iris LockManual White Balance Operation Balance WIPE/FADERProgram AE ExposureManual Camera Display SystemDSC For Playback MenuVideo Bright , DATE/TIME , Time Code Video DisplayPlayback Sound DisplayDubbing Dubbing To Or From a VCRTo Use This Camcorder As a Player To Use This Camcorder As a RecorderDV cable Optional Core filter To DV To DV @ Core filterPlayback Special Effects Using the Remote Control UnitSlow-Motion Playback Frame-By-Frame PlaybackTo hear the dubbed sound during playback Set 12bit Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing Insert EditingRandom Assemble Editing R.A.Edit SET REMOTE/VCR CodeMake Connections Select Scenes Diagnosing VCR/CAMCORDER Timing Adjustment of VCR/CAMCORDER TimingAutomatic Editing to VCR For More Accurate EditingConnection To a Personal Computer Using USB cableUsing DV cable Using USB cableImage taken using Snapshot is too dark No power is suppliedFocus does not adjust automatically Snapshot mode cannot be usedDate/time does not appear Black & White Fader does not workImage looks like the shutter speed is too Slow White Balance cannot be activatedMemory card cannot be played back Charger indicator on the camcorder does Not lightAn error indication E01, E02 or E06 appears An error indication E03 or E04 appearsBattery Packs CassettesMemory Cards How to handle a CD-ROM LCD MonitorMain Unit About moisture condensation For Your MaintenanceCleaning The Camcorder After UseAC Adapter CamcorderLCD monitor Controls, Connectors And IndicatorsRemote Control IndexAudio/Video Input/Output @ Digital Video Input/Output ConnectorPower Switch  pg1024 During Both Tape And Memory Card Recording LCD Monitor/Viewfinder Indications2b i t / SOUND1 During Memory Card Recording OnlyAppears when Digital Image Stabiliser DIS is Appears when in the Squeeze or Cinema modeAppears when the Insert Editing w or Insert Editing Displays the sound mode for approx seconds afterHigh E01, E02 or E06 Unit in Safeguard Mode E03 or E04 Unit in Safeguard Mode EjectAppears if a file in another format is selected RM-V717U optional Using The Optional RM-V717U Remote Control UnitTerms See previous page as well
Top Page Image Contents