JVC GR-D72 Wipe Or Fader Effects, Program AE With Special Effects, EN Features for Recording

Page 30
Set “v” to the desired mode. ( pg. 25)
Set “r” to the desired mode. ( pg. 25)

30 EN FEATURES FOR RECORDING

SNAPSHOT Button

MMENU/VOL.

Power Switch

Lock Button

VIDEO/MEMORY

Wipe Or Fader Effects

IMPORTANT:

Some Wipe/Fader Effects cannot be used with certain modes of Program AE with special effects. (See the right column) If an unusable Wipe/Fader Effect is selected, its indicator blinks in blue or goes out.

These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next.

Wipe or Fader works when video recording is started or stopped.

1 Set the VIDEO/MEMORY Switch to “VIDEO”.

2 Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

3 Open the LCD monitor fully. ( pg. 12)

4

The WIPE/FADER menu disappears and the effect is reserved.

The selected effect indicator appears.

5 Press the Recording Start/Stop Button to activate the Fade-in/out or Wipe-in/out.

To deactivate the selected effect

Select “OFF” in step 4. The effect indicator disappears.

NOTE:

You can extend the length of a Wipe or Fader by pressing and holding the Recording Start/Stop Button.

WIPE/FADER

OFF: Disables the function. (Factory-preset)

FADER–WHITE: Fade in or out with a white screen.

FADER–BLACK: Fade in or out with a black screen.

FADER–B.W: Fade in to a color screen from a black and white screen, or fade out from color to black and white.

WIPE–CORNER: Wipe in on a black screen from the upper right to the lower left corner, or wipe out from lower left to upper right, leaving a black screen.

WIPE–WINDOW: The scene starts in the center of a black screen and wipes in toward the corners, or comes in from the corners, gradually wiping out to the center.

WIPE–SLIDE: Wipe in from right to left, or wipe out from left to right.

WIPE–DOOR: Wipe in as the two halves of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene.

WIPE–SCROLL: The scene wipes in from the bottom to the top of a black screen, or wipes out from top to bottom, leaving a black screen.

WIPE–SHUTTER: Wipe in from the center of a black screen toward the top and bottom, or wipe out from the top and bottom toward the center leaving a black screen.

Program AE With Special Effects

IMPORTANT:

Some modes of Program AE with special effects cannot be used with certain Wipe/Fader effects. (See the left column) If an unusable mode is selected, the indicator of Program AE with Special Effects blinks or goes out.

1 Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

2 Open the LCD monitor fully. ( pg. 12)

3

The PROGRAM AE menu disappears and the selected effect is activated.

The selected effect indicator appears.

To deactivate the selected effect

Select “OFF” in step 3. The effect indicator disappears.

NOTES:

Program AE with special effects can be changed during recording or during Record-Standby.

Some modes of Program AE with special effects cannot be used during Night-Alive.

PROGRAM AE

OFF: Disables the function. (Factory-preset)

SHUTTER 1/60: The shutter speed is fixed at 1/ 60th of a second. Black bands that usually appear when shooting a TV screen become narrower.

SHUTTER 1/100: The shutter speed is fixed at 1/ 100th of a second. The flickering that occurs when shooting under a fluorescent light or mercury-vapor lamp is reduced.

Image 30
Contents Dear Customer For Customer UseLYT1226-001A EN Safety Precautions Important Safty Instructions Before recording an important scene…EN Contents How To Attach The Shoulder Strap Provided AccessoriesHow To Attach The Lens Cap Getting Started ENEN Getting Started PowerCharging The Battery Pack Close the core filter until it clicks shutUsing AC Power Using The Battery PackGrip Adjustment Colder temperaturesPower-Linked Operation Operation ModeDate/Time Settings InformationTripod Mounting Viewfinder AdjustmentDiopter Adjustment Control StartedMemory card is not provided To switch the recording mode, refer to pages 25Loading/Unloading a Cassette Close the card coverBasic Recording Video Recording ENVideo Recording & Playback EN Video Recording Tape Remaining TimeTime Code Journalistic Shooting Recording From The Middle Of a TapeSelf Recording VideoShuttle Search To control the speaker volumeNormal Playback Blank SearchButtons And Functions Installing The BatteryVideo Playback EN SlotSlow-Motion Playback EN Video PlaybackPlayback Zoom Frame-By-Frame PlaybackPlayback If using a VCR, go to . If not, go to stepConnections To a TV Or VCR White to Audio L Red to Audio R Yellow to Video To S-VIDEOEN D.S.C. Recording Approximate Number of Storable ImagesDubbing Still Images Recorded On a Tape To a Memory Card C. Recording ENDigital Still Camera D.S.C. Recording & Playback Index Playback Of Files Normal Playback Of ImagesAuto Playback Of Images EN D.S.C. PlaybackRemoving On-Screen Display Battery indicator disappearViewing File Information C. Playback ENDeleting Files EN Additional Features for D.S.CProtecting Files To Remove ProtectionPrints Folder and File names Resetting The File NameInitializing a Memory Card Open the LCD monitor fully.  pgMenus without Sub Menus Changing The Menu SettingsFeatures Menus with Sub MenusEN Menus for Detailed Adjustment Recording MenusAuto  pg , Date/Time Settings Advanced Features pg , Brightness Adjustment Of The Display Fine / StandardExecute / Return Playback MenusLCD / Finder OFF / LCD / LCD/TVNight Alive White LED LightTo deactivate Night-Alive Wipe Or Fader Effects EN Features for RecordingSelect OFF in . The effect indicator disappears Program AE With Special EffectsSnapshot For Video Recording Motor Drive ModeAuto Focus SportsExposure Control Manual FocusIris Lock To return to automatic exposure controlTo change the setting To lock the exposure control and the irisTo return to automatic white balance To use this camcorder as a player EN EditingTo use this camcorder as a recorder On the connected TVIt is also possible to copy recorded scenes from Equipped With a DV Connector DigitalDubbing Camcorder onto another video unit equipped with a DVUsing USB cable Using DV cable Connection To a Personal Computer Using USB cableUsing DV cable It is possible to do the following thingsEditing EN Audio DubbingInsert Editing Set Narration to on or MIX.  pgEN Additional Information Loading/Unloading a Cassette pgVideo Playback pg C. Recording pg ReferencesVideo and D.S.C. Recording EN TroubleshootingPower Video and D.S.C. PlaybackAdvanced features Other problems Power Switch is set to a HSet the Power Switch to M.  pgSubject is too bright HSet r to SPOTLIGHT.  pg Places subject to low temperature, images become dark HPush in the memory card a few more times.  pgTime Code is set to OFF HSet Time Code to ON.  pg , 27 Appears if Audio Dubbing is attempted on a tape Appears when no tape is loaded.  pgRemaining power level Recorded in the LP mode.  pgCard Error Cassettes Battery PacksUsing Household AC Plug Adapter Memory CardsLCD Monitor How To Handle a CD-ROMEN Cautions Main UnitAbout moisture condensation Serious malfunctioningDeclaration of Conformity Slide BATT.RELEASE 1 and remove the battery pack Cleaning The CamcorderEN User Maintenance After UseCamcorder AC AdapterUSB EN Index Controls IndicatorsPOWER/CHARGE Lamp  pg Other PartsDuring Video Recording Only During D.S.C. Recording OnlyREC Bright MIC Blank Search Push Stop Button To CancelDuring Video Playback During D.S.C. Playback BR I GHTTerms Terms Wide Mode Wide ModeTerms EN Video/AV input S/AV Input 28, 34GR-D72