JVC GR-D72 manual Dubbing, Equipped With a DV Connector Digital, Any image or sound deterioration

Page 35
Turn on the video unit’s power.
Insert the source cassette in this camcorder. Insert the recording cassette in the video unit.

 

EDITING EN 35

Dubbing To Or From A Video Unit

NOTES:

It is recommended to use the AC Adapter as the power

Equipped With A DV Connector (Digital

supply instead of the battery pack. ( pg. 7)

 

Dubbing)

If the remote control is used when both the player and

recorder are JVC video units, both units will perform the

 

same operation. To prevent this from happening, press the

It is also possible to copy recorded scenes from the

buttons on both units.

camcorder onto another video unit equipped with a DV

If a blank portion or disturbed image is played back on the

connector. Since a digital signal is sent, there is little if

player during dubbing, the dubbing may stop so that an

any image or sound deterioration.

unusual image is not dubbed.

Even though the DV cable is connected correctly,

 

 

sometimes the image may not appear in step 9. If this

 

occurs, turn off the power and make connections again.

 

If “Playback Zoom” ( pg. 16) or “Playback Special Effects”

 

( pg. 16) is attempted or SNAPSHOT is pressed during

 

playback, only the original playback image recorded on the

 

tape is output from the DV IN/OUT connector.

 

When using a DV cable, be sure to use the optional

 

JVC VC-VDV204U DV cable.

Core filter

To DV IN/OUT

DV cable (optional)

To DV IN/OUT

Video unit equipped with DV connector

To use this camcorder as a recorder

1)Perform steps 1 to 4 in “To use this camcorder as a player”.

2)Set “REC MODE” to “SP” or “LP”. ( pg. 25, 26)

3)Insert the recording cassette in this camcorder.

4)Press the Recording Start/Stop Button to engage the Record-Pause mode.

The “ DV. IN ” indication appears on the screen.

5)Press the Recording Start/Stop Button to start recording. The T indication rotates.

6)Press the Recording Start/Stop Button again to stop recording. The T indication stops rotating.

NOTES:

If no image is displayed on the LCD monitor, set “S/AV INPUT” to “OFF”. ( pg. 25, 28)

Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting. ( pg. 26)

ADVANCED FEATURES

To use this camcorder as a player

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

3 Set this camcorder’s VIDEO/MEMORY Switch to “VIDEO”.

4 Set this camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

5

6

7

8 Press 4/9 on this camcorder to start playback of the source cassette.

9 At the point you want to start dubbing, engage the video unit’s Record mode.

10 To pause dubbing, engage the video unit’s Record- Pause mode and press 4/9 on this camcorder.

11 Repeat steps 8 10 for additional editing. Stop the video unit and camcorder.

Image 35
Contents LYT1226-001A EN Dear CustomerFor Customer Use Safety Precautions Before recording an important scene… Important Safty InstructionsEN Contents Getting Started EN Provided AccessoriesHow To Attach The Lens Cap How To Attach The Shoulder StrapClose the core filter until it clicks shut PowerCharging The Battery Pack EN Getting StartedColder temperatures Using The Battery PackGrip Adjustment Using AC PowerInformation Operation ModeDate/Time Settings Power-Linked OperationStarted Viewfinder AdjustmentDiopter Adjustment Control Tripod MountingClose the card cover To switch the recording mode, refer to pages 25Loading/Unloading a Cassette Memory card is not providedVideo Recording & Playback Basic RecordingVideo Recording EN Tape Remaining Time EN Video RecordingVideo Journalistic Shooting Recording From The Middle Of a TapeSelf Recording Time CodeBlank Search To control the speaker volumeNormal Playback Shuttle SearchSlot Installing The BatteryVideo Playback EN Buttons And FunctionsFrame-By-Frame Playback EN Video PlaybackPlayback Zoom Slow-Motion PlaybackWhite to Audio L Red to Audio R Yellow to Video To S-VIDEO If using a VCR, go to . If not, go to stepConnections To a TV Or VCR PlaybackApproximate Number of Storable Images EN D.S.C. RecordingDigital Still Camera D.S.C. Recording & Playback Dubbing Still Images Recorded On a Tape To a Memory CardC. Recording EN EN D.S.C. Playback Normal Playback Of ImagesAuto Playback Of Images Index Playback Of FilesC. Playback EN Battery indicator disappearViewing File Information Removing On-Screen DisplayTo Remove Protection EN Additional Features for D.S.CProtecting Files Deleting FilesPrints Open the LCD monitor fully.  pg Resetting The File NameInitializing a Memory Card Folder and File namesMenus with Sub Menus Changing The Menu SettingsFeatures Menus without Sub MenusAuto EN Menus for Detailed AdjustmentRecording Menus Fine / Standard Advanced Features pg , Brightness Adjustment Of The Display  pg , Date/Time SettingsOFF / LCD / LCD/TV Playback MenusLCD / Finder Execute / ReturnTo deactivate Night-Alive Night AliveWhite LED Light Program AE With Special Effects EN Features for RecordingSelect OFF in . The effect indicator disappears Wipe Or Fader EffectsSports Motor Drive ModeAuto Focus Snapshot For Video RecordingTo return to automatic exposure control Manual FocusIris Lock Exposure ControlTo return to automatic white balance To change the settingTo lock the exposure control and the iris On the connected TV EN EditingTo use this camcorder as a recorder To use this camcorder as a playerCamcorder onto another video unit equipped with a DV Equipped With a DV Connector DigitalDubbing It is also possible to copy recorded scenes fromIt is possible to do the following things Connection To a Personal Computer Using USB cableUsing DV cable Using USB cable Using DV cableSet Narration to on or MIX.  pg Audio DubbingInsert Editing Editing ENLoading/Unloading a Cassette pg EN Additional InformationReferences Video Playback pg C. Recording pgVideo and D.S.C. Playback EN TroubleshootingPower Video and D.S.C. RecordingSubject is too bright HSet r to SPOTLIGHT.  pg Advanced features Other problemsPower Switch is set to a HSet the Power Switch to M.  pg Time Code is set to OFF HSet Time Code to ON.  pg , 27 Places subject to low temperature, images become darkHPush in the memory card a few more times.  pg Recorded in the LP mode.  pg Appears when no tape is loaded.  pgRemaining power level Appears if Audio Dubbing is attempted on a tapeCard Error Memory Cards Battery PacksUsing Household AC Plug Adapter CassettesMain Unit How To Handle a CD-ROMEN Cautions LCD MonitorDeclaration of Conformity About moisture condensationSerious malfunctioning After Use Cleaning The CamcorderEN User Maintenance Slide BATT.RELEASE 1 and remove the battery packUSB CamcorderAC Adapter EN Index Other Parts IndicatorsPOWER/CHARGE Lamp  pg ControlsREC Bright During Video Recording OnlyDuring D.S.C. Recording Only BR I GHT Blank Search Push Stop Button To CancelDuring Video Playback During D.S.C. Playback MICTerms Video/AV input S/AV Input 28, 34 Wide Mode Wide ModeTerms EN TermsGR-D72