JVC GR-D72 manual Normal Playback, Shuttle Search, Blank Search, Still Playback

Page 14

14 EN VIDEO PLAYBACK

 

MMENU/VOL.

Shuttle Search

BLANK SEARCH

Allows high-speed search in either direction during video

 

 

playback.

 

1) During playback, press 5 for forward search, or

 

3 for reverse search.

 

2) To resume normal playback, press 4/9.

 

During playback, press and hold 5 or 3. The search

 

continues as long as you hold the button. Once you release

 

the button, normal playback resumes.

 

A slight mosaic effect appears on the display during Shuttle

 

Search. This is not a malfunction.

 

ATTENTION:

 

During Shuttle Search, parts of the

Power Switch

picture may not be clearly visible,

Lock Button

particularly on the left side of the

screen.

VIDEO/MEMORY

 

8

 

4/9

Blank Search

 

Helps you find where you should start recording in the middle of a tape to avoid time code interruption.

( pg. 13)

1 Load a cassette. ( pg. 10)

2 Set the VIDEO/MEMORY Switch to “VIDEO”.

3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

 

 

4 During Stop mode, press BLANK SEARCH.

 

3

The “BLANK SEARCH” indication appears and the

 

camcorder automatically starts reverse or forward search,

 

 

Speaker

5

then stops at the spot which is about 3 seconds of tape

 

 

before the beginning of the detected blank portion. To cancel Blank Search midway, press 8.

Normal Playback

1 Load a cassette. ( pg. 10)

2 Set the VIDEO/MEMORY Switch to “VIDEO”.

3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

4 To start playback, press 4/9.

5 To stop playback, press 8.

During Stop mode, press 3 to rewind, or 5 to fast- forward the tape.

To control the speaker volume

Rotate the MMENU/VOL. Wheel towards “+” to turn up the volume, or towards “–” to turn down the volume.

NOTES:

The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV. ( pg. 17)

For other notes,  pg. 39.

Still Playback

Pauses during video playback.

1)Press 4/9 during playback.

2)To resume normal playback, press 4/9 again.

If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.

When 4/9 is pressed, the image may not pause immediately while the camcorder stabilizes the still image.

NOTES:

Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.

Blank Search does not work if “USE CLEANING CASSETTE” has appeared with the tape.

If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.

A blank portion which is shorter than 5 seconds of tape may not be detected.

The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.

Image 14
Contents LYT1226-001A EN Dear CustomerFor Customer Use Safety Precautions Important Safty Instructions Before recording an important scene…EN Contents How To Attach The Shoulder Strap Provided AccessoriesHow To Attach The Lens Cap Getting Started ENEN Getting Started PowerCharging The Battery Pack Close the core filter until it clicks shutUsing AC Power Using The Battery PackGrip Adjustment Colder temperaturesPower-Linked Operation Operation ModeDate/Time Settings InformationTripod Mounting Viewfinder AdjustmentDiopter Adjustment Control StartedMemory card is not provided To switch the recording mode, refer to pages 25Loading/Unloading a Cassette Close the card coverVideo Recording & Playback Basic RecordingVideo Recording EN EN Video Recording Tape Remaining TimeTime Code Journalistic Shooting Recording From The Middle Of a TapeSelf Recording VideoShuttle Search To control the speaker volumeNormal Playback Blank SearchButtons And Functions Installing The BatteryVideo Playback EN SlotSlow-Motion Playback EN Video PlaybackPlayback Zoom Frame-By-Frame PlaybackPlayback If using a VCR, go to . If not, go to stepConnections To a TV Or VCR White to Audio L Red to Audio R Yellow to Video To S-VIDEOEN D.S.C. Recording Approximate Number of Storable ImagesDigital Still Camera D.S.C. Recording & Playback Dubbing Still Images Recorded On a Tape To a Memory CardC. Recording EN Index Playback Of Files Normal Playback Of ImagesAuto Playback Of Images EN D.S.C. PlaybackRemoving On-Screen Display Battery indicator disappearViewing File Information C. Playback ENDeleting Files EN Additional Features for D.S.CProtecting Files To Remove ProtectionPrints Folder and File names Resetting The File NameInitializing a Memory Card Open the LCD monitor fully.  pgMenus without Sub Menus Changing The Menu SettingsFeatures Menus with Sub MenusAuto EN Menus for Detailed AdjustmentRecording Menus  pg , Date/Time Settings Advanced Features pg , Brightness Adjustment Of The Display Fine / StandardExecute / Return Playback MenusLCD / Finder OFF / LCD / LCD/TVTo deactivate Night-Alive Night AliveWhite LED Light Wipe Or Fader Effects EN Features for RecordingSelect OFF in . The effect indicator disappears Program AE With Special EffectsSnapshot For Video Recording Motor Drive ModeAuto Focus SportsExposure Control Manual FocusIris Lock To return to automatic exposure controlTo return to automatic white balance To change the settingTo lock the exposure control and the iris To use this camcorder as a player EN EditingTo use this camcorder as a recorder On the connected TVIt is also possible to copy recorded scenes from Equipped With a DV Connector DigitalDubbing Camcorder onto another video unit equipped with a DVUsing USB cable Using DV cable Connection To a Personal Computer Using USB cableUsing DV cable It is possible to do the following thingsEditing EN Audio DubbingInsert Editing Set Narration to on or MIX.  pgEN Additional Information Loading/Unloading a Cassette pgVideo Playback pg C. Recording pg ReferencesVideo and D.S.C. Recording EN TroubleshootingPower Video and D.S.C. PlaybackSubject is too bright HSet r to SPOTLIGHT.  pg Advanced features Other problemsPower Switch is set to a HSet the Power Switch to M.  pg Time Code is set to OFF HSet Time Code to ON.  pg , 27 Places subject to low temperature, images become darkHPush in the memory card a few more times.  pg Appears if Audio Dubbing is attempted on a tape Appears when no tape is loaded.  pgRemaining power level Recorded in the LP mode.  pgCard Error Cassettes Battery PacksUsing Household AC Plug Adapter Memory CardsLCD Monitor How To Handle a CD-ROMEN Cautions Main UnitDeclaration of Conformity About moisture condensationSerious malfunctioning Slide BATT.RELEASE 1 and remove the battery pack Cleaning The CamcorderEN User Maintenance After UseUSB CamcorderAC Adapter EN Index Controls IndicatorsPOWER/CHARGE Lamp  pg Other PartsREC Bright During Video Recording OnlyDuring D.S.C. Recording Only MIC Blank Search Push Stop Button To CancelDuring Video Playback During D.S.C. Playback BR I GHTTerms Terms Wide Mode Wide ModeTerms EN Video/AV input S/AV Input 28, 34GR-D72