JVC GR-D72 manual Appears if Audio Dubbing is attempted on a tape, Recorded in the LP mode.  pg

Page 43

 

 

 

 

 

 

 

 

TROUBLESHOOTING

EN 43

Warning Indications

 

 

 

 

 

 

 

 

 

 

 

A. DUB ERROR!

 

 

 

 

 

 

 

 

<CANNOT DUB ON A LP RECORDED TAPE>

 

 

 

 

 

 

 

 

<CANNOT DUB ON A 16bit RECORDING>

 

 

 

 

 

 

 

 

<CHECK TAPE’S ERASE PROTECTION TAB>

Displays the battery remaining power.

 

 

 

 

 

● Appears if Audio Dubbing is attempted on a tape

Remaining power level

 

 

 

 

 

 

recorded in the LP mode. ( pg. 37)

 

 

 

 

 

 

 

 

High

 

Exhausted

 

● Appears if Audio Dubbing is attempted on a tape

As the battery power comes close to nil, the battery

 

recorded in 16-bit audio. ( pg. 37)

indicator blinks.

 

 

 

● Appears if A. DUB (D) on the remote control is pressed

When the battery power is exhausted, power turns off

 

when the erase protection tab is set to “SAVE”.

automatically.

 

 

 

( pg. 37)

INSERT ERROR!

Appears when no tape is loaded. ( pg. 10)

CHECK TAPE’S ERASE PROTECTION TAB

Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “A” or “M” and the VIDEO/MEMORY Switch is set to “VIDEO”. ( pg. 8)

USE CLEANING CASSETTE

Appears if dirt is detected on the heads during recording. Use an optional cleaning cassette. ( pg. 46)

CONDENSATION, OPERATION PAUSED PLEASE WAIT

Appears if condensation occurs. (The two indications above swiches alternately every 3 seconds.) When this indication is displayed, wait more than 1 hour until condensation disappears.

TAPE!

Appears if a tape is not loaded when the Recording Start/ Stop Button or SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and the VIDEO/ MEMORY Switch is set to “VIDEO”.

TAPE END

Appears when the tape ends during recording or playback. ( pg. 38)

SET DATE/TIME!

●Appears when the date/time is not set. ( pg. 8)

●Appears when the built-in clock (lithium) battery is discharged and the previously set date/time is erased. ( pg. 8)

LENS CAP

Appears for 5 seconds after power is turned on if the lens cap is attached.

A. DUB ERROR!

Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 37)

Appears if Insert Editing is attempted on a blank portion of a tape. ( pg. 37)

INSERT ERROR!

<CANNOT EDIT ON A LP RECORDED TAPE> <CHECK TAPE’S ERASE PROTECTION TAB>

●Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( pg. 37)

●Appears if INSERT (I) on the remote control is pressed when the erase protection tab is set to “SAVE”. ( pg. 37)

MEMORY IS FULL

Appears when the memory card’s memory is full and shooting is not possible.

COPYING FAILED

●Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.

●Appears in the following cases when dubbing from a tape to a memory card (as digital stills):

•when no memory card is loaded.

•when the memory card’s memory is full.

•when the memory card is not formatted.

•when a write-protected SD Memory Card is loaded. ( pg. 19)

MEMORY CARD!

Appears if there is no memory card loaded when you attempt to record on a memory card or access data on a memory card.

PLEASE FORMAT

Appears when there is a problem with a memory card and its memory is corrupt, or it has not been initialized. Initialize the memory card. ( pg. 24)

NO IMAGES STORED

Appears if there are no image files stored in the memory card when you attempt memory card playback.

REFERENCES

Page 42 Page 44
Image 43
Page 42 Page 44
Contents For Customer Use Dear CustomerLYT1226-001A EN Safety Precautions Before recording an important scene… Important Safty InstructionsEN Contents Getting Started EN Provided AccessoriesHow To Attach The Lens Cap How To Attach The Shoulder StrapClose the core filter until it clicks shut PowerCharging The Battery Pack EN Getting StartedColder temperatures Using The Battery PackGrip Adjustment Using AC PowerInformation Operation ModeDate/Time Settings Power-Linked OperationStarted Viewfinder AdjustmentDiopter Adjustment Control Tripod MountingClose the card cover To switch the recording mode, refer to pages 25Loading/Unloading a Cassette Memory card is not providedVideo Recording EN Basic RecordingVideo Recording & Playback Tape Remaining Time EN Video RecordingVideo Journalistic Shooting Recording From The Middle Of a TapeSelf Recording Time CodeBlank Search To control the speaker volumeNormal Playback Shuttle SearchSlot Installing The BatteryVideo Playback EN Buttons And FunctionsFrame-By-Frame Playback EN Video PlaybackPlayback Zoom Slow-Motion PlaybackWhite to Audio L Red to Audio R Yellow to Video To S-VIDEO If using a VCR, go to . If not, go to stepConnections To a TV Or VCR PlaybackApproximate Number of Storable Images EN D.S.C. RecordingC. Recording EN Dubbing Still Images Recorded On a Tape To a Memory CardDigital Still Camera D.S.C. Recording & Playback EN D.S.C. Playback Normal Playback Of ImagesAuto Playback Of Images Index Playback Of FilesC. Playback EN Battery indicator disappearViewing File Information Removing On-Screen DisplayTo Remove Protection EN Additional Features for D.S.CProtecting Files Deleting FilesPrints Open the LCD monitor fully.  pg Resetting The File NameInitializing a Memory Card Folder and File namesMenus with Sub Menus Changing The Menu SettingsFeatures Menus without Sub MenusRecording Menus EN Menus for Detailed AdjustmentAuto Fine / Standard Advanced Features pg , Brightness Adjustment Of The Display  pg , Date/Time SettingsOFF / LCD / LCD/TV Playback MenusLCD / Finder Execute / ReturnWhite LED Light Night AliveTo deactivate Night-Alive Program AE With Special Effects EN Features for RecordingSelect OFF in . The effect indicator disappears Wipe Or Fader EffectsSports Motor Drive ModeAuto Focus Snapshot For Video RecordingTo return to automatic exposure control Manual FocusIris Lock Exposure ControlTo lock the exposure control and the iris To change the settingTo return to automatic white balance On the connected TV EN EditingTo use this camcorder as a recorder To use this camcorder as a playerCamcorder onto another video unit equipped with a DV Equipped With a DV Connector DigitalDubbing It is also possible to copy recorded scenes fromIt is possible to do the following things Connection To a Personal Computer Using USB cableUsing DV cable Using USB cable Using DV cableSet Narration to on or MIX.  pg Audio DubbingInsert Editing Editing ENLoading/Unloading a Cassette pg EN Additional InformationReferences Video Playback pg C. Recording pgVideo and D.S.C. Playback EN TroubleshootingPower Video and D.S.C. RecordingPower Switch is set to a HSet the Power Switch to M.  pg Advanced features Other problemsSubject is too bright HSet r to SPOTLIGHT.  pg HPush in the memory card a few more times.  pg Places subject to low temperature, images become darkTime Code is set to OFF HSet Time Code to ON.  pg , 27 Recorded in the LP mode.  pg Appears when no tape is loaded.  pgRemaining power level Appears if Audio Dubbing is attempted on a tapeCard Error Memory Cards Battery PacksUsing Household AC Plug Adapter CassettesMain Unit How To Handle a CD-ROMEN Cautions LCD MonitorSerious malfunctioning About moisture condensationDeclaration of Conformity After Use Cleaning The CamcorderEN User Maintenance Slide BATT.RELEASE 1 and remove the battery packAC Adapter CamcorderUSB EN Index Other Parts IndicatorsPOWER/CHARGE Lamp  pg ControlsDuring D.S.C. Recording Only During Video Recording OnlyREC Bright BR I GHT Blank Search Push Stop Button To CancelDuring Video Playback During D.S.C. Playback MICTerms Video/AV input S/AV Input 28, 34 Wide Mode Wide ModeTerms EN TermsGR-D72
Top Page Image Contents