JVC LYT0610-001A, GR-DVL107 specifications EN33

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as shown in the illustration (☞ pg. 32).

If using a VCR . . . go to step 3. If not . . . go to step 4.

Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

EN33

C. Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors

*When connecting the cables, open this cover.

			When the S-Video
			cable is not used.
			←
	Audio/Video cable		Yellow to VIDEO IN
	[mini-plug to RCA plug]
	(provided)
	Core filter		White to AUDIO L IN
	To AV		Red to AUDIO R IN
To S	Core	S-Video cable	To S-VIDEO IN
		(provided)
	filter

To TV or VCR

Connector cover*

TV

VCR

1

2

3

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “ON” or “OFF” in the

Menu Screen (☞ pg. 30). •Time Code

.... set “TIME CODE” to “ON” or “OFF” in the

Menu Screen (☞ pg. 30).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “SIMPLE” in the

Menu Screen (☞ pg. 30). Or, press DISPLAY on the remote control (provided).

NOTES:

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (☞ pg. 7).

●When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.

●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “ ” or “ ”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

●Set the video out select switch of the cable adapter as required:

Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.