JVC GR-DVL107, LYT0610-001A specifications 56 EN

56EN

TROUBLESHOOTING(cont.)

SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
39. An error indication	39. •A malfunction of some kind	39. •Remove the power supply
(E01 — E06) appears.	has occurred. In this case	(battery pack, etc.) and wait a
	the camcorder’s functions	few minutes for the indication
	become unusable.	to clear. When it does, you
		can resume using the
		camcorder.
		If the indication remains even
		though you repeat the above
		two or three times, please
		consult your nearest JVC
		dealer.
40. The charger indicator on	40. •The temperature of the	40. •To protect the battery, it is
the AC Power Adapter/	battery is extremely high/low.	recommended to charge it
Charger does not light.	•Charging is difficult in	in places with a temperature
	places subject to extremely	of 10°C to 35°C (☞ pg. 63).
	high/low temperatures.
41. Picture does not appear on	41. •The lens cap is attached.	41. •Remove the lens cap
the LCD monitor.	•The LCD monitor's	(☞ pg. 12).
	brightness setting is too	•Adjust the brightness of the
	dark.	LCD monitor (☞ pg. 12).
		•If the monitor is tilted
		upward 180 degrees, open
		the monitor fully (☞ pg. 13).
42. When the image is printed	42. •This is not a malfunction.	42. •By recording with “DIS”
from the printer, a black		activated (☞ pg. 22) this
bar appears at the bottom		can be avoided.
of the screen.
43. When the camcorder is	43. •The DV cable was plugged/	43. •Turn the camcorder’s power
connected via the DV	unplugged with power	off and on again, then
connector, the camcorder	turned on.	operate it.
does not operate.