JVC LYT0610-001A, GR-DVL107 specifications EN5, How To Attach The Core Filter

EN5

How To Attach The Core Filter

Attach the provided Core Filter to the PC connection cable provided with optional HS-V14KIT software (GR- DVL107/100 only). The Core Filter reduces interference.

1

Stopper

Release the stoppers on both ends of the Core Filter.

2 3 cm

Wind once

Run the cable through the Core Filter, leaving approx. 3 cm of cable between the cable plug and the Core Filter. Wind the cable once around the outside of the Core Filter as shown in the illustration.

•Wind the cable so that it is not slack.

NOTE:

Take care not to damage the cable.

3

Close the Core Filter until it clicks shut.

■When connecting cables, attach the end with the Core Filter to the camcorder.

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO. MODE” is set to “ON” (factory-preset).

■ Available when the Power Switch is set to “ ” or “ ” and no cassette is in the camcorder.

■Performing any operation during the demonstration stops the demonstration temporarily. If no operation is per- formed for more than 1 minute after that, the demonstra- tion will resume.

■“DEMO. MODE” remains “ON” even if the camcorder power is turned off.

■To cancel Automatic Demonstration, set the Power Switch to “ ”, then press MENU/BRIGHT while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not have to go through the Menu Screen). Rotate MENU/BRIGHT to select “OFF” and press it. The normal screen appears.

MENU/BRIGHT Wheel

CAMERA MENU

1RETURN
REC MODE
SOUND MODE
ZOOM
GA I N UP
TAL L Y
I D NUMBER
DEMO. MODE	ON
S I DE LED	OF F

GR-DVL300 only