JVC LYT0610-001A, GR-DVL107 EN63, To avoid hazards, To prevent damage and prolong service life

Page 63

CAUTIONS

Video Light

EN63

Battery Packs

DANGER

The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.

Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time.

When operating, keep a distance of about 30 cm between the video light and people or objects.

Do not use near flammable or explosive materials.

It is recommended that you consult your nearest JVC dealer for replacing the video light.

General Battery Precautions

If the remote control is not functioning even if it is being operated correctly, the batteries are ex- hausted. Replace them with fresh ones.

Use only the following batteries: AAA (R03) size x 2

Please make note of the following rules for battery use. When misused, the batteries can leak or explode.

1.When replacing batteries, refer to page 39.

2.Do not use any different size of batteries from those specified.

3.Be sure to install batteries in the correct direction.

4.Do not use rechargeable batteries.

5.Do not expose the batteries to excessive heat as they can leak or explode.

6.Do not dispose of the batteries in a fire.

7.Remove the batteries from the unit if it is to be stored for an extended period to avoid battery leakage which can cause malfunctions.

The supplied battery pack is a lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions:

1. To avoid hazards . . .

Terminals

 

.... do not burn.

 

.... do not short-circuit the terminals. When

transporting, make sure the provided battery

cap is attached to the battery. If the battery cap

is misplaced, carry the battery in a plastic bag.

.... do not modify or disassemble.

.... do not expose the battery to temperatures

exceeding 60°C, as this may cause the battery

to overheat, explode or catch fire.

.... use only specified chargers.

 

2.To prevent damage and prolong service life . . .

.... do not subject to unnecessary shock.

.... charge in an environment where temperatures are within the tolerances shown in the chart below. This is a chemical reaction type battery—cooler temperatures impede chemical reaction, while warmer temperatures can prevent complete charging.

.... store in a cool, dry place. Extended exposure to high temperatures will increase natural discharge and shorten service life.

.... fully charge and then fully discharge the battery every 6 months when storing the battery pack over a long period time.

.... remove from charger or powered unit when not in use, as some machines use current even when switched off.

NOTES:

It is normal for the battery pack to be warm after charging, or after use.

Temperature Range Specifications Charging ............. 10°C to 35°C Operation ........... 0°C to 40°C Storage ............... –10°C to 30°C

Recharging time is based on room temperature of 20°C.

The lower the temperature, the longer recharging takes.

Image 63
Contents GR-DVL300 GR-DVL107 GR-DVL100 It is recommended that you Dear CustomerEN3 Some DO’S and DON’TS on the Safe USE of EquipmentCable Adapter Remote Control UnitRM-V716U BN-V408U AAA R03 Battery x For remote control unitHow To Attach The Core Filter EN5Release the stoppers on both ends of the Core Filter Blinking to indicate charging has started PowerCharging the Battery Pack Lithium-ion is vulnerable in colder temperaturesApproximate recording time Using AC PowerTo Detach The Battery Pack EN7Tripod Mounting Grip AdjustmentViewfinder Adjustment Shoulder Strap AttachmentDate/Time Settings EN9Press MENU/BRIGHT. The Menu Screen appears Loading/Unloading a Cassette 10 ENRecording Mode Setting Set the tape recording mode depending on your preferenceEN11 To Stop Recording To Adjust The Brightness Of The Display12 EN Recording Basic RecordingOFF EN13Journalistic Shooting SELF-RECORDINGBasic Recording Snapshot Mode Selection14 EN SnapshotEN15 Slide the Power Zoom Lever towards T ZoomZoom Out Shooting When a blank portion is recorded on a tapeEN17 Proper recordingFeature Video Light To brighten the scene when natural lighting is too dimSet Light OFF/AUTO/ON as required EN19 Recording Advanced FeaturesFeature Auto Focus Feature Manual FocusIf you have selected , or Advanced FeaturesUsing Menus For Detailed Adjustment See pgMenu Screen Explanations 22 EN EN23 To Deactivate The Selected Effect 24 ENFade/Wipe Effects Picture Wipe or Dissolve SelectionFader And Wipe Menu EN25Slow EN Recording Advanced FeaturesTo Deactivate The Selected Mode Slow Slow ShutterExposure Control Iris LockEN27 To Return To Automatic White Balance White Balance Adjustment28 EN Manual White Balance OperationEN29 To Control The Speaker VolumeAvailable only with the remote control provided pg Playback Basic Playback30 EN Playback Advanced FeaturesPlayback Sound DisplayEN31 Basic Connections EN PlaybackEN33 Make sure the camcorder and PC are turned off 34 ENPlayback Advanced Connections Connection To a Personal ComputerFor GR-DVL300/DVL100 Owners Connection To a Video Unit Equipped With a DV ConnectorEN35 Make sure all units are turned off36 EN Dubbing To a VCRVCR Recording deck To use this camcorder as a player EN37Repeat steps 5 through 7 for additional editing 38 ENRe-attach the battery compartment cover Installing The BatteriesCont 40 ENEN41 Feature Slow-Motion PlaybackFeature Frame-By-Frame Playback Feature Playback ZoomFeature Playback Special Effects 42 ENTo allow you to add creative effects to the playback image You are now ready to try Random Assemble Editing VCR Code ListEN43 SET REMOTE/VCR CodeMake Connections Connect the editing cable to the Remote Pause connectorConnect the editing cable to the R.A.EDIT connector 44 ENSelect Scenes EN45Automatic Editing to VCR 46 ENRecording deck For More Accurate EditingEN47 Diagnosing VCR/CAMCORDER Timing48 EN Adjustment of VCR/CAMCORDER TimingTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen pgAudio Dubbing EN49Corrective Action 50 ENLooks strange Subject does not include Snapshot mode cannot be Squeeze mode isUsed Selected Mode pg Colour of Snapshot Light source or Not work Slow Shutter modeWithin 5 minutes after 52 ENStandby mode. Make sure You continue operationsIndicators On Screen is set to Even when Slow Shutter isActivated Mode is activated Before setting White When shooting a subject54 EN During recording, sound 56 EN EN57 AdjustedIndex Indications LCD Monitor/Viewfinder Indications During RecordingCondensation Operation Paused Head Cleaning Required USE Clean ING CassetteIndications Check TAPE’S EraseDifferent DUB ErrorTape Tape END 345 6 7 # $ % 60ENEN61 Turn off the camcorder Cleaning The CamcorderPress Battery Release and remove the battery pack After UseTo prevent damage and prolong service life EN63To avoid hazards Dirty heads can cause the following problems To prolong service lifeFor safety, do not Avoid using the unitEN65 About moisture condensationSerious malfunctioning Icons 66 ENDate/Time Display Pg , 30 Gain UpWhite Balance TallyTime Code Unload a Tape ......................................... pgCamcorder 68 ENEN69 AC Power Adapter/Charger AA-V40EKMemo Memo GR-DVL100