JVC GR-DVF21, GR-DVF11 specifications Focusing, EN25, Manual Focus, To Change To Auto Focus

Page 25

Focus detection zone

NOTES:

If the lens is smeared or blurred, accurate focusing is not possible. Keep the lens clean, wiping with a piece of soft cloth if it gets dirty. When condensation occurs, wipe with a soft cloth or wait for it to dry naturally.

When shooting a subject close to the lens, zoom out first (pg. 14). If zoomed-in in the auto focus mode, the camcorder may automatically zoom out depending on the distance between the camcorder and the

subject. This will not occur when “TELE MACRO” (pg. 20) is activated.

MENU/BRIGHT

Dial

Power Switch

FOCUS

FOCUS

NOTES:

When the power is turned off, Manual Focus will be reset to “AUTO”.

Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a subject in the wide-angle position, sharply focused images cannot be obtained when zoomed up because the depth-of-field is reduced at longer focal lengths.

When the focus level cannot be adjusted any further or closer, “” or “” will blink.

EN25

Focusing

AUTO FOCUS

The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm (2") to the subject) to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing):

•When two subjects overlap in the same scene. •When illumination is low.*

•When the subject has no contrast (difference in bright- ness and darkness), such as a flat, one-color wall, or a clear, blue sky.*

•When a dark object is barely visible in the viewfinder.* •When the scene contains minute patterns or identical

patterns that are regularly repeated.

•When the scene is affected by sunbeams or light reflecting off the surface of a body of water.

•When shooting a scene with a high-contrast background.

* The following low-contrast warnings appear blinking:

RECORDING

 

, , and

 

MANUAL FOCUS

If you are using the viewfinder, you should already have made the necessary viewfinder adjustments (pg. 11).

1 Set the Power Switch to “ ”.

2 Press MENU/BRIGHT. The Recording Menu appears.

3 Rotate MENU/BRIGHT to move the highlight bar to “FOCUS”, then press it.

4 Rotate MENU/BRIGHT to display “MANUAL”, then press it. The Recording Menu disappears and “FOCUS” is displayed in the upper left corner. The focus is locked at this point.

5 To focus on a farther subject, rotate MENU/BRIGHT downward. “” appears and blinks.

To focus on a nearer subject, rotate MENU/BRIGHT upward. “” appears and blinks.

6 Press MENU/BRIGHT. Focus adjustment is complete. The indication changes from “FOCUS” to “MANUAL”.

•If you want to reset the focus, repeat from step 2.

To Change To Auto Focus . . .

.... rotate MENU/BRIGHT to display “AUTO” then press

it in step 4. The manual focus indicators disappear. Or, set the Power Switch to “”.

Image 25
Contents GR-DVF21 GR-DVF11 It is recommended that you Dear CustomerEN3 Cleaning AccessoriesDamage Requiring Service Replacement PartsAA-V20U EN5Charging the Battery Pack PowerSlide the battery in the opposite direction of the arrow Lithium-ion is vulnerable in colder temperaturesUsing AC Power Using the Battery PackTo Detach The Battery Pack EN7Built-in Clock’s Rechargeable Lithium Battery Date/Time SettingsEN9 Loading/Unloading a CassettePress Push Open and open the LCD monitor AutomaticallyEN Getting Started Recording Mode SettingViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Tripod Mounting12 EN To Adjust The Brightness Of The DisplayShooting While Watching Viewfinder Rotate MENU/BRIGHT until the brightnessEN13 Power Switch PositionJournalistic Shooting SELF-RECORDINGSlide the Power Zoom Lever towards W Slide the Power Zoom Lever towards T14 EN ZoomTo brighten the scene when natural lighting is too dim Feature Video Light GR-DVF21 onlyEN15 Set Light OFF/AUTO/ON as required16 EN When a blank portion is recorded on a tapeProper recording ShootingSnapshot Motor Drive ModeSnapshot Recording If you press during Record-StandbyRotate MENU/BRIGHT until the desired param Using Menus For Detailed AdjustmentRecording Menu Explanations Mode Menu ExplanationsOn Next Date/Time Menu Explanations Factory presetSystem Menu Explanations Before the following steps, perform steps 1 through 4 above LCD Monitor/Viewfinder IndicationsFade/Wipe Effects 22 ENPicture Wipe or Dissolve Selection If you select Picture Wipe/Dissolve during recordingFader And Wipe Menu EN23Program AE With Special Effects 24 ENEN25 FocusingAuto Focus Manual FocusExposure Control 26 ENTo Return To Automatic Exposure Control EN27 Iris LockIris To Return To Automatic Iris ControlManual White Balance Operation White Balance AdjustmentTo Return To Automatic White Balance To Change The Tint For RecordingTo Control The Speaker Volume Load a tape pg Set the Power Switch toAvailable only with the RM-V711U remote control pg EN29Playback Menu allows you to set the following functions Playback MenuDisplay Displaying the Date During Playback Playback SoundEN31 Time Code Displaying The Time Code During PlaybackUse optional S-Video and Audio cables 32 ENUse optional Video and Audio cables EN33 If using a VCR . . . go to step If not . . . go to stepConnection To a Personal Computer 34 ENEN35 Connection To a Video Unit Equipped With a DV ConnectorMake sure all units are turned off 36 EN Switch back to Connect when an S-Video cable is not usedTape Dubbing Engage the VCR’s AUX and Record-Pause modesEN37 Digital Dubbing38EN Installing The BatteryFunctions Buttons EN39Feature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Zoom 40 ENEN41 Feature Playback Special EffectsTo allow you to add creative effects to the playback image 42 EN Create edited videos easily using your camcorder asSET REMOTE/VCR Code Press Shift for this oneEN43 JVC VCR equipped with a remote pause connectorMake Connections Select ScenesSelect Scenes 44 ENAutomatic Editing to VCR EN45Not start editing For More Accurate Editing 46 ENDiagnosing VCR/CAMCORDER Timing Recording deckEN47 Adjustment of VCR/CAMCORDER TimingAudio Dubbing 48 ENCorrective Action EN49Tape END appears Position except BrightMode Menu Use the Picture Wipe Function pg Selected the mode50 EN Mode Menu Mode is set to OFFEven when Slow Shutter is Indicators disappear Date/Time Menu52 EN Corrective Action After Use Cleaning The CamcorderTurn off the camcorder EN55 Using Household AC Plug Adapter56 EN EN57 E 0 Q 9 W 58ENEN59 60 EN Displays the operation mode positionLCD Monitor/Viewfinder Indications During Recording FunctionEN61 LCD Monitor/Viewfinder Indications During PlaybackIndications Function Function62 EN EN63 ConnectorsGeneral GR-DVF11

GR-DVF21, GR-DVF11 specifications

The JVC GR-DVF11 and GR-DVF21 camcorders represent a fusion of advanced technology and user-friendly features, appealing to both amateur filmmakers and seasoned videographers. These models, part of JVC's renowned GR series, showcase the brand's commitment to high-quality video recording and ease of use.

One of the standout features of the GR-DVF11 and GR-DVF21 is their compact design, which makes them highly portable. Weighing less than a traditional camcorder, these models are designed for on-the-go shooting, allowing users to capture life’s moments without the burden of heavy equipment.

Both camcorders come equipped with a high-resolution 16:9 widescreen CCD sensor that ensures stunning image quality. This sensor captures crisp and vibrant colors, making it ideal for shooting in various lighting conditions. The GR-DVF21, in particular, boasts a higher pixel count, further enhancing its capability to deliver exceptionally detailed video.

The JVC GR-DVF11 and GR-DVF21 also leverage advanced digital zoom technology, providing up to 700x zoom capabilities. This feature allows users to capture distant subjects with clarity, making it particularly useful for wildlife filming or events where the subject is far away. The optical zoom feature, essential for maintaining image quality, complements the digital zoom, offering users flexibility in framing their shots.

A unique characteristic of these camcorders is the integration of JVC's Digital Image Stabilization (DIS) technology, which minimizes shaking and enhances video stability. This feature is especially beneficial for handheld shooting, where any unintended movements can spoil the footage. Consequently, users can achieve smoother recordings, even during dynamic filming situations.

Both models include a versatile selection of shooting modes, including a range of preset effects and manual control options. This versatility empowers users to experiment with their video creation, whether they choose to shoot with automatic settings or dive into manual adjustments for greater creative control.

In terms of connectivity, the GR-DVF11 and GR-DVF21 offer multiple interfaces, including USB and FireWire compatibility, allowing for quick and efficient video transfer to computers. This feature streamlines the editing process, making it easy for users to work with their footage right after shooting.

In summary, the JVC GR-DVF11 and GR-DVF21 camcorders combine cutting-edge technology with intuitive features, appealing to a wide range of users. With their compact design, high-resolution sensors, advanced zoom capabilities, and robust stabilization technology, these camcorders are well-suited for capturing high-quality video in diverse shooting conditions. Whether for personal memories or professional projects, they deliver performance that satisfies the demands of modern videography.