JVC GR-DVF11 36 EN, Tape Dubbing, Engage the VCR’s AUX and Record-Pause modes, VCR Recording deck

Following the illustration, connect the camcorder and the VCR. Also refer to pg. 32 and 33.

36EN

TAPEDUBBING

To Video

Output*

White to

Audio

Output L

Audio cable (optional)

Video cable (optional)

The connectors are located beneath the cover.

To S-Video

Output

Red to

Audio

Output R

S-Video cable (optional)

Tape Dubbing

1

2 Set the camcorder’s Power Switch to “ ”, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3 Engage the VCR’s AUX and Record-Pause modes.

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/

6on the camcorder.

5 Press 4/6 on the camcorder and engage the VCR’s Record mode.

6 Engage the VCR’s Record-Pause mode and press 4/6on the camcorder.

7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

●You can use Playback Zoom (☞ pg. 40) or Playback Special Effects (☞ pg. 41) in step 5.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

White to	Red to
AUDIO L IN	AUDIO R IN
To VIDEO IN*	To S-VIDEO IN

VCR (Recording deck)

TV

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DISPLAY” to “ON” or “OFF” in the Playback

Menu (☞ pg. 30). •Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Playback

Menu (☞ pg. 30). •Playback Sound Mode Display

.... set the Power Switch to “ ”. Press MENU/BRIGHT

and set “ON SCREEN” in the Date/Time Menu (☞ pg. 18 – 20) to “ON” or “OFF”. Then, set the Power

Switch back to “ ”.

*Connect when an S-Video cable is not used.