JVC GR-DVF11, GR-DVF21 specifications Power, Charging the Battery Pack, About Batteries

Page 6
Remove the battery pack’s protective cap. Attach the battery pack with its long groove pointing toward the indicator side of the battery pack mount on the AC Power Adapter/Charger. The CHARGE Indicator begins blinking to indicate charging has started.
When the CHARGE indicator stops blinking but stays lit, charging is finished.

6EN

Battery pack BN-V207U or BN-V214U

CHARGE indicator

POWER indicator

To AC outlet

AC Power

Adapter/Charger

AA-V20U

DC OUT connector

Battery pack

Charging time

 

 

BN-V207U

approx. 1 hr. 30 min.

 

 

BN-V214U (optional)

approx. 3 hrs.

 

 

GETTINGSTARTED

Power

This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

CHARGING THE BATTERY PACK

1 Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger. Plug the AC Adapter/ Charger’s power cord into an AC outlet. The POWER indicator lights.

2

3

4 Slide the battery in the opposite direction of the arrow

and lift off. Remember to unplug the AC Adapter/ Charger’s power cord from the AC outlet.

NOTES:

Perform charging where the temperature is between 10° and 30°C (50°F and 86°F). 20° to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete.

Charging times noted above are for a fully discharged battery pack.

Charging time varies according to the ambient temperature and the status of the battery pack.

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops.

Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.

If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.

Lithium-ion is vulnerable in colder temperatures.

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.

WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold temperatures (below 10° C/50° F), its usage time becomes shorter and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

Image 6
Contents GR-DVF21 GR-DVF11 Dear Customer It is recommended that you EN3 Damage Requiring Service AccessoriesCleaning Replacement PartsEN5 AA-V20USlide the battery in the opposite direction of the arrow PowerCharging the Battery Pack Lithium-ion is vulnerable in colder temperaturesTo Detach The Battery Pack Using the Battery PackUsing AC Power EN7Date/Time Settings Built-in Clock’s Rechargeable Lithium BatteryPress Push Open and open the LCD monitor Loading/Unloading a CassetteEN9 AutomaticallyRecording Mode Setting EN Getting StartedShoulder Strap Attachment Grip AdjustmentViewfinder Adjustment Tripod MountingShooting While Watching Viewfinder To Adjust The Brightness Of The Display12 EN Rotate MENU/BRIGHT until the brightnessJournalistic Shooting Power Switch PositionEN13 SELF-RECORDING14 EN Slide the Power Zoom Lever towards TSlide the Power Zoom Lever towards W ZoomEN15 Feature Video Light GR-DVF21 onlyTo brighten the scene when natural lighting is too dim Set Light OFF/AUTO/ON as requiredProper recording When a blank portion is recorded on a tape16 EN ShootingSnapshot Recording Motor Drive ModeSnapshot If you press during Record-StandbyUsing Menus For Detailed Adjustment Rotate MENU/BRIGHT until the desired paramMode Menu Explanations Recording Menu ExplanationsOn Next Factory preset Date/Time Menu ExplanationsSystem Menu Explanations LCD Monitor/Viewfinder Indications Before the following steps, perform steps 1 through 4 abovePicture Wipe or Dissolve Selection 22 ENFade/Wipe Effects If you select Picture Wipe/Dissolve during recordingEN23 Fader And Wipe Menu24 EN Program AE With Special EffectsAuto Focus FocusingEN25 Manual Focus26 EN Exposure ControlTo Return To Automatic Exposure Control Iris Iris LockEN27 To Return To Automatic Iris ControlTo Return To Automatic White Balance White Balance AdjustmentManual White Balance Operation To Change The Tint For RecordingAvailable only with the RM-V711U remote control pg Load a tape pg Set the Power Switch toTo Control The Speaker Volume EN29Playback Menu Playback Menu allows you to set the following functionsEN31 Playback SoundDisplay Displaying the Date During Playback Time Code Displaying The Time Code During Playback32 EN Use optional S-Video and Audio cablesUse optional Video and Audio cables If using a VCR . . . go to step If not . . . go to step EN3334 EN Connection To a Personal ComputerConnection To a Video Unit Equipped With a DV Connector EN35Make sure all units are turned off Tape Dubbing Switch back to Connect when an S-Video cable is not used36 EN Engage the VCR’s AUX and Record-Pause modesDigital Dubbing EN37Installing The Battery 38ENEN39 Functions ButtonsFeature Playback Zoom Feature Slow-Motion PlaybackFeature Frame-By-Frame Playback 40 ENFeature Playback Special Effects EN41To allow you to add creative effects to the playback image SET REMOTE/VCR Code Create edited videos easily using your camcorder as42 EN Press Shift for this oneMake Connections JVC VCR equipped with a remote pause connectorEN43 Select Scenes44 EN Select ScenesEN45 Automatic Editing to VCRNot start editing Diagnosing VCR/CAMCORDER Timing 46 ENFor More Accurate Editing Recording deckAdjustment of VCR/CAMCORDER Timing EN4748 EN Audio DubbingTape END appears Position except EN49Corrective Action BrightSelected the mode Mode Menu Use the Picture Wipe Function pg50 EN Even when Slow Shutter is Mode is set to OFFMode Menu Indicators disappear Date/Time Menu52 EN Corrective Action Cleaning The Camcorder After UseTurn off the camcorder Using Household AC Plug Adapter EN5556 EN EN57 58EN E 0 Q 9 WEN59 LCD Monitor/Viewfinder Indications During Recording Displays the operation mode position60 EN FunctionIndications Function LCD Monitor/Viewfinder Indications During PlaybackEN61 Function62 EN Connectors EN63General GR-DVF11