JVC GR-DVF21, GR-DVF11 specifications Digital Dubbing, EN37

Page 37
Press 4to play back the source tape.

Power Switch

To DV IN/OUT

The connectors are

 

located beneath

 

the cover.

 

DV cable (optional)

To DV IN/OUT

Video unit equipped with DV connector

EN37

Digital Dubbing

It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.

1 Make sure the camcorder’s power is off.

2 Connect the camcorder to your video unit equipped with a DV connector using a DV cable as shown in the illustration.

3

4 While watching the playback on the monitor, engage the DV connector-equipped video unit’s record mode from the spot on the source tape you want to begin recording.

NOTES:

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (☞ pg. 7).

●If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units.

●For Digital Dubbing, this camcorder can be connected only to one device at a time. This camcorder can also be used as a recorder.

●If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

●Even though the DV cable is connected correctly, sometimes the image may not appear in step 3. If this occurs, turn off the power and make connections again.

●If “Playback Zoom” (☞ pg. 40), “Playback Special Effects” (☞ pg. 41) or “Snapshot” is attempted during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.

To Use This Camcorder As A Recorder . . .

1.Turn the Power Switch to “ ”.

2.Connect the DV cable as shown in the illustration and load a cassette to record on.

3.Press the Recording Start/Stop button to engage the Record-Pause mode. “DV IN” appears on the screen.

4.Press the Recording Start/Stop button to start recording. “DV IN” changes to “ DV IN ”.

5.Press the Recording Start/Stop button again to engage the Record-Pause mode. “ DV IN ” returns to “DV IN”.

NOTES:

●The image is dubbed using the recording mode selected in the Mode Menu (☞ pg. 10).

●Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting (☞ pg. 20).

●During Digital Dubbing, no signals are output from the video or audio connectors.

Page 36 Page 38
Image 37
Page 36 Page 38
Contents GR-DVF21 GR-DVF11 It is recommended that you Dear CustomerEN3 Cleaning AccessoriesDamage Requiring Service Replacement PartsAA-V20U EN5Charging the Battery Pack PowerSlide the battery in the opposite direction of the arrow Lithium-ion is vulnerable in colder temperaturesUsing AC Power Using the Battery PackTo Detach The Battery Pack EN7Built-in Clock’s Rechargeable Lithium Battery Date/Time SettingsEN9 Loading/Unloading a CassettePress Push Open and open the LCD monitor AutomaticallyEN Getting Started Recording Mode SettingViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Tripod Mounting12 EN To Adjust The Brightness Of The DisplayShooting While Watching Viewfinder Rotate MENU/BRIGHT until the brightnessEN13 Power Switch PositionJournalistic Shooting SELF-RECORDINGSlide the Power Zoom Lever towards W Slide the Power Zoom Lever towards T14 EN ZoomTo brighten the scene when natural lighting is too dim Feature Video Light GR-DVF21 onlyEN15 Set Light OFF/AUTO/ON as required16 EN When a blank portion is recorded on a tapeProper recording ShootingSnapshot Motor Drive ModeSnapshot Recording If you press during Record-StandbyRotate MENU/BRIGHT until the desired param Using Menus For Detailed AdjustmentRecording Menu Explanations Mode Menu ExplanationsOn Next Date/Time Menu Explanations Factory presetSystem Menu Explanations Before the following steps, perform steps 1 through 4 above LCD Monitor/Viewfinder IndicationsFade/Wipe Effects 22 ENPicture Wipe or Dissolve Selection If you select Picture Wipe/Dissolve during recordingFader And Wipe Menu EN23Program AE With Special Effects 24 ENEN25 FocusingAuto Focus Manual FocusExposure Control 26 ENTo Return To Automatic Exposure Control EN27 Iris LockIris To Return To Automatic Iris ControlManual White Balance Operation White Balance AdjustmentTo Return To Automatic White Balance To Change The Tint For RecordingTo Control The Speaker Volume Load a tape pg Set the Power Switch toAvailable only with the RM-V711U remote control pg EN29Playback Menu allows you to set the following functions Playback MenuDisplay Displaying the Date During Playback Playback SoundEN31 Time Code Displaying The Time Code During PlaybackUse optional S-Video and Audio cables 32 ENUse optional Video and Audio cables EN33 If using a VCR . . . go to step If not . . . go to step Connection To a Personal Computer 34 ENEN35 Connection To a Video Unit Equipped With a DV ConnectorMake sure all units are turned off 36 EN Switch back to Connect when an S-Video cable is not usedTape Dubbing Engage the VCR’s AUX and Record-Pause modesEN37 Digital Dubbing38EN Installing The BatteryFunctions Buttons EN39Feature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Zoom 40 ENEN41 Feature Playback Special EffectsTo allow you to add creative effects to the playback image 42 EN Create edited videos easily using your camcorder asSET REMOTE/VCR Code Press Shift for this oneEN43 JVC VCR equipped with a remote pause connectorMake Connections Select ScenesSelect Scenes 44 ENAutomatic Editing to VCR EN45Not start editing For More Accurate Editing 46 ENDiagnosing VCR/CAMCORDER Timing Recording deckEN47 Adjustment of VCR/CAMCORDER TimingAudio Dubbing 48 ENCorrective Action EN49Tape END appears Position except BrightMode Menu Use the Picture Wipe Function pg Selected the mode50 EN Mode Menu Mode is set to OFFEven when Slow Shutter is Indicators disappear Date/Time Menu52 EN Corrective Action After Use Cleaning The CamcorderTurn off the camcorder EN55 Using Household AC Plug Adapter56 EN EN57 E 0 Q 9 W 58ENEN59 60 EN Displays the operation mode positionLCD Monitor/Viewfinder Indications During Recording FunctionEN61 LCD Monitor/Viewfinder Indications During PlaybackIndications Function Function62 EN EN63 ConnectorsGeneral GR-DVF11
Top Page Image Contents