JVC LYT0217-001A, GR-DVA1 Manual White Balance Operation, SET Manual White Balance, Enter Setting

White paper

	Select Dial		Power Switch
	Display
			Manual Mode
	FOCUS	AUTO
	EXPOSURE	AUTO	Item Menu
4	W. BALANCE	AUTO
	FADER	OFF
	/ WIPE
	P. AE	OFF
	/ EFFECT
	RETURN
PRO.			Manual White
			Balance Adjustment

EN37

Manual White Balance Operation

If the camera is operating in PRO. mode, perform a Manual White Balance when shooting under various types of lighting.

	SELECT OPERATION MODE
1 Follow steps 1 through 4 of the white balance
	adjustment (☞ pg. 36), select “	MAN.”.
	SET MANUAL WHITE BALANCE
2 Hold a sheet of plain white paper in front of the
	subject. Adjust zoom or position yourself so that the
	white paper fills the screen.
	ENTER SETTING
3 Press the Select Dial until the		begins blinking.
	•When the setting is completed, the stops
	blinking.
	EXIT MANUAL WHITE BALANCE
4 ADJUSTMENT
	Press the Select Dial. The indication “W.BAL.”		RECORDING
	changes to “PRO.” and only the Manual White

Balance indicator is displayed.

To Change The Tint For Recording . . .

.... in step 2, substitute colored paper for white. The white

balance is adjusted based on the color, changing the tint. Red paper — deeper green; blue paper — orange; yellow paper — deeper purple.

NOTES:

●In step 2, it may be difficult to focus on the white paper

in some circumstances. In such a case, adjust focus manually (☞ pg. 33).

●A subject can be shot under various types of lighting conditions indoors (natural, flourescent, candlelight, etc.). Because the color temperature is different depending on the light source, the tint of the subject will differ depending on the white balance settings. Use this function for a more natural result.

●Once you adjust white balance during Manual White Balance operation, the setting is retained even if the power is turned off or the battery removed.