JVC LYT0217-001A, GR-DVA1 manual Using the Remote Control Unit EN45, Installing The Battery

USINGTHEREMOTECONTROLUNITEN45

A
2	3
	1
Slot
B
2	1 3
1
Knob

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. The RM-V712U remote control unit (optional) makes additional playback functions possible.

Installing The Battery

The remote control uses one lithium battery (CR2025).

1 PULL OUT BATTERY HOLDER

A : Pull out the battery holder by inserting a pointed instrument into the slot.

B : Pull out the battery holder while pressing the knob as shown.

2 INSERT BATTERY IN HOLDER

Insert the battery in the holder, and be sure to have the “+” mark visible.

3 RE-INSERT HOLDER

Slide the holder back in until you hear a click.

•Read the caution concerning lithium batteries (☞ pg. 2).

Transmitted beam effective area

5m

30°

Remote sensor

30°

When using the remote control, be sure to point it at the remote sensor. The illustration shows the approximate transmitted beam effective area for indoor use.

The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.