JVC LYT0217-001A, GR-DVA1 manual Using AC Power, Using a CAR Battery, Charge Marker

Page 9

 

 

 

EN

 

9

 

 

 

 

 

Charge marker

Charge Marker

 

A charge marker is provided on the battery pack to

 

 

 

help you remember whether it has been charged or

 

 

not. Two colors are provided (red and black)—you

 

 

 

 

choose which one means charged and which means

 

 

 

 

 

 

discharged.

 

 

 

 

NOTES:

●The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs.

●Charging times noted on page 8 are for fully discharged battery pack, and discharging times are for fully charged battery pack.

●Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

●Remember to set the charge marker after charging a battery pack or after detaching a discharged one from your camcorder.

●Perform the REFRESH function after no less than 5 chargings.

●While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does not charge the battery. When disharging is complete, detach the battery from the AC Power Adapter/Charger to store it.

●High temperatures can damage the battery pack, so use only where good ventilation is available. Do not allow it to discharge in container, such as a bag.

●If you stop recharging or discharging part way through, make sure to remove the battery pack before unplugging the adapter’s AC cord.

●Remove the battery pack from the adapter immediately after discharging.

●To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●Make sure you unplug the DC cord before charging or discharging the battery pack.

●The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHARGE indicator should blink during recharging. If not, contact your nearest JVC dealer.

GETTING STARTED

To DC IN jack

To AC outlet

 

DC OUT

 

terminal

AC Power

DC Cord Adapter/Charger

AA-V15U

To car’s cigarette

lighter

Car Battery Cord socket AP-V7U (optional)

Car Battery

Charger/Adapter

BH-V3U (optional)

USING AC POWER

Use the AC Power Adapter/Charger (connect as shown in the illustration to the left).

NOTES:

●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

●When using the DC cord, make sure you connect the end of the cord with the core filter to the camcorder. The core filter reduces interference.

USING A CAR BATTERY

Use the optional Car Battery Cord or Car Battery Charger/Adapter (connect as shown in the illustration to the left).

NOTES:

●When using the car battery, leave the engine idling.

●The optional Car Battery Charger (BH-V3U) can also be used to charge the battery pack (other than BN-V20U/856U).

●When using the optional Car Battery Charger or Car Battery Cord (AP-V7U), refer to the respective instruction booklet.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents For Customer Use GR-DVA1For clock operation and remote control unit Dear CustomerIt is recommended that you Power Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsAbout Batteries AA-V15UBN-V11U Audio VideoContents Power Charging the Battery PackUsing the Battery Pack Using AC Power Using a CAR BatteryCharge Marker 10 EN Insert Battery in HolderGetting Started RE-INSERT HolderSelect Operation Mode Date/Time SettingsAccess Recording Menu Access DATE/TIME MenuLoading/Unloading a Cassette 12 ENOpen Cassette Cover INSERT/REMOVE TapeSET Recording Mode Recording Mode SettingFirst move the highlight bar to REC Mode by Set depending on your preferenceGrip Adjustment Viewfinder Adjustment14 EN Shoulder Strap Attachment Adjust LengthTripod Mounting Attach Strap16 EN Power Switch PositionRecording Basic Recording Load a CassetteViewfinder Indications Stop RecordingPress Display Button 18 EN Feature Picture StabilizerBasic Recording ZoomFeature Video Light To brighten the scene when natural lighting is too dimBattery power Basic Features When blank portion is recorded on a tapeProper recording Displaying The Date And Time During Recording Recording Advanced Features EN21Select Function SET Function Parameters22 EN Advanced FeaturesRecording SnapshotEN23 Motor Drive ModeRecording Advanced Features Using Menu For Detailed Adjustment24 EN Recording Menu Explanations System Menu Explanations Date/Time Menu ExplanationsEffect Selection Fade/Wipe EffectsFADE/WIPE Selection B K , , B WPicture Wipe or Dissolve Selection P, P, P, P , P, P and P 28 ENStart Recording Before the following steps, perform steps 1 through 3 on pgFader And Wipe Menu Disable Mode Select Mode30 EN Program AE With Special EffectsTwilight ShutterSepia Monotone32 EN FocusingAuto Focus Patterns that are regularly repeatedAccess Manual Focus Access Manual Mode Item MenuAdjust Focus END Adjustment of Focus34 EN Access Exposure ControlExposure Control To darken the imageCenter SUBJECT, Lock Iris Iris LockIris To Return To Automatic Iris ControlAccessment White Balance Adjust White Balance AdjustmentSelect Auto in . Or set the Power Switch to 36 ENExit Manual White Balance Adjustment Enter SettingManual White Balance Operation SET Manual White BalancePlayback Basic Playback 38 ENRewind or Fast-forward the tape Play BackFeature Shuttle Search Feature Still PlaybackFeature Slow-Motion Playback Feature Playback ZoomAccess Playback Menu Playback Advanced Features40 EN Playback MenuPlayback Sound Displaying The Time Code During PlaybackRecording sound Display Output sound 42 EN ConnectorsPlayback ConnectionsTurn on the camcorder, the VCR and the TV Connectvcr Camcorder to TV orTape Dubbing 44 ENInstalling The Battery Using the Remote Control Unit EN45Pull OUT Battery Holder Remote control uses one lithium battery CR2025Functions EN Using the Remote Control UnitButtons RM-V712U onlyFeature Slow-Motion Playback RM-V712U only To allow slow-speed search in either directionTo stop Slow-Motion Playback in progess, press Play 48 EN Using the Remote Control UnitPlayback Zoom Activate ZoomPlayback Special Effects Accessmenu Playback Effect SelectStart Playback Select Playback Effect9 ` 50 ENSET REMOTE/VCR Code Operate VCRSelect Scenes Make ConnectionsSelect Scenes 52 ENUSE FADE/WIPE on Scene Transition if Necessary USE Program AE with Special Effects if NecessaryAutomatic Editing to VCR Prepare Source TapeStop Editing 54 EN For More Accurate EditingDiagnosing VCR’S Against Camcorder Timing Input Correction Data Adjustment of VCR’S Against Camcorder TimingPossible Causes Corrective Action 56 ENSet the Power Switch to Effects and Fade/Wipe Video mode Video playbackSelected the mode For editing was registered Completed pg Being used in a sceneTroubleshooting 58 ENRecording Menu Use the Picture Wipe Function pg OFF in the Date/Time Date/Time Menu Screen Indicators On Screen is set to Set on Screen to onEx. fingerprints Cause damage AE with special effectsPossible Causes 60 ENAfter Use Cleaning The Camcorder# $ t % 62EN$ Power Switch Battery Release Switch Video Light SwitchClock Battery Slot Tripod Mounting Socket Select Dial +, -, Push @ MENU/DISPLAY ButtonIndex 64 ENIndications Viewfinder Indications During RecordingVolume Error Refer ManualViewfinder Indications During Playback SOUND1 Tape END66 EN Information Using Household AC Plug AdapterAvoid using the unit For safety, do notDo not leave the unit To protect the unit, do notAC Power Adapter/Charger AA-V15U SpecificationsConnectors CamcorderMemo Memo GR-DVA1
Top Page Image Contents