JVC GR-DVL567 Recording Mode Setting, Set the tape recording mode depending on your preference

Page 13

EN 13

MENU/BRIGHT Wheel

Power Lamp

Power Switch

Lock Button

Recording Mode Setting

Set the tape recording mode depending on your preference.

1 Set the Power Switch to “	MANUAL	” while pressing
	MANUAL

down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on.

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3 Rotate the MENU/BRIGHT wheel to select

“ CAMERA” and press it. The CAMERA Menu appears.

4 Rotate the MENU/BRIGHT wheel to select “REC MODE” and press it. The Sub Menu appears. Select “SP” or “LP” by rotating the MENU/BRIGHT wheel and press it. Rotate the MENU/BRIGHT wheel to select “ RETURN”, and press it twice. The Menu Screen closes.

Display

REC MODE – SP LP

Menu Screen

• Audio Dubbing ( pg. 63) and Insert Editing

( pg. 64) are possible on tapes recorded in the

SP mode.

• “LP” (Long Play) is more economical, providing

1.5 times the recording time.

Sub Menu

GR-DVL867/DVL865/DVL767/ DVL765/DVL567/DVL367/DVL365 only

NOTES:

●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

Image 13

Contents Instructions It is recommended that you Dear CustomerPage Before recording an important scene How To Attach The Lens Cap Set the Power Switch to How To Attach The Core FilterWhile pressing down Getting Started Charging the Battery Pack PowerBattery pack Charging time To Detach The Battery PackUsing AC Power Using the Battery PackApproximate recording time GR-DVL867/DVL865/DVL767/DVL765 Viewfinder Adjustment Grip Adjustment10 EN Shoulder Strap AttachmentMENU/BRIGHT Wheel Power Lamp Date/Time SettingsLock Button Display Display Menu12 EN Approximate recording time Tape Recording modeLoading/Unloading a Cassette Set the tape recording mode depending on your preference Recording Mode SettingSP mode Audio Dubbing pg and Insert EditingLoading a Memory Card Picture Quality/Image Size SettingTo Unload a Memory Card Tape Recording 16 EN To Adjust The Brightness Of The DisplayBasic Recording Remove the lens capPower Switch Position Operation ModeJournalistic Shooting SELF-RECORDING18 EN Slide the Power Zoom Lever towards TZoom Zoom OutSet Light OFF/AUTO/ON as required OFF Turns off the light To brighten the scene when natural lighting is too dim20 EN When a blank portion is recorded on a tapeTime Code Proper recordingSpeakerswitch To Control The Speaker VolumeNormal Playback Connections 22 ENCamcorder TV or VCRDate/Time Set DATE/TIME to AUTO, on or OFF Menu Screen pg If using a VCR . . . go to step If not . . . go to step24 EN To cancel Blank Search midwayBlank Search PressMemory Card Recording Playback Basic Shooting Snapshot 26 ENTo Delete Unwanted Still Images When unwanted still images are storedTo Remove The Shutter Sound To Protect Valuable Files available only for SD Memory CardAuto Playback 28 ENType of file played back last time is played If you are viewing an Image fileViewing File Information Index PlaybackRemoving On-Screen Display Protecting Files 30 ENTo Remove Protection Stored file is displayedDelete Screen Deleting FilesDubbing Still Images Recorded On a Tape To a Memory Card 32 ENLock Button Display Menu Screen Play/Pause Button 4/6 Stop Button MENU/BRIGHT WheelTo Make Video Clips from REAL-TIME Camera Image To cancel E-Mail Clip RecordingTo Make Video Clips from Recorded Video Footage To view video clips stored on a memory card34 EN To Reset The SettingTo Print ALL Still Images ONE Print for Each Press the MENU/BRIGHT wheel in. The Menu Screen appearsTo Print by Selecting Still Images NO. of Prints To Reset The No. Of PrintsFast-Forward 3 Button Rewind Button Making a New Folder 36 ENInitialising a Memory Card Folder and File namesAdvanced Features 38 EN To Deactivate The Selected ModeNight-Scope To Deactivate Night-ScopeMakes evening scenes look more natural Sports Variable Shutter Speed 1/250 1/4000Gives recorded scenes a strobe effect Your recording looks like a series of consecutive snapshots40 EN Power Switch Recording Start/Stop ButtonFade/Wipe Effects To Deactivate The Selected EffectMenu Effect Fader And Wipe MenuSet the VIDEO/MEMORY Switch to Video GR Snapshot Mode Selection42 EN Snapshot For Tape RecordingTo obtain correct focus While focusing on a nearer subjectFocus detection zone SubjectExposure Control 44 ENIris Lock Manual White Balance Operation White Balance AdjustmentTo Return To Automatic White Balance For Recording Menu 46 ENSee pg Go to stepMenu Screen Explanations Factory-preset10X 40XFrom 01 to 99. Factory setting is Screen ratio becomes Appears. When using this mode, referNormal screen ratio Screen and the image appears like a letterboxed 169 movieGR-DVL867/DVL865/DVL767/DVL765/DVL567/DVL367/DVL365 only Refer to Picture Quality/Image Size Setting pgTo VIDEO, still images are recorded only onto the tape Camera Menu is also applicable to memory card recording50 EN Following procedure applies to all except Synchro Comp pgFor Playback Menu Display Playback SoundDubbing To a VCR 52 ENPress 4 to play back the source tape To use this camcorder as a playerTo DV Core filter Core filter To DV54 EN Installing The BatteriesSwitch set to the camera Set to Play With the camcorder’s Power SwitchTo allow frame-by-frame search during tape playback 56 ENTo allow you to add creative effects to the playback image Select MenuFeature Playback Zoom SET REMOTE/VCR Code 58 ENVCR Recording deck Connect the editing cable to the R.A.EDIT Connector Connect the editing cable to the Remote Pause connectorMake Connections Also refer to pgSelect Scenes 60 ENRandom Assemble Editing Menu appears Editing MenuAutomatic Editing to VCR 62 EN Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingConnector GR-DVL867 Set 12BIT Mode to Sound 2 or MIX Menu Screen pgAudio Dubbing To hear the dubbed sound during playbackInsert Editing 64 ENUsing DV cable Using USB or PC connection cableThis camcorder can be used as a WebCam via USB connection 66 ENReferences 68 EN Lithium-ion is vulnerable in colder temperaturesAbout Batteries Benefits Of Lithium-Ion BatteriesBattery is dead Power is not connectedProperly Or OFFFind a white subject and compose 70 EN10X optical zoom is selected Set Zoom to 40X or 500X Video pgWhen shooting a subject White Balance cannot be Sepia or Monotone mode isAre protected Stored on the memory card Delete them pg Set the VIDEO/MEMORY 72 ENCheck the section of the manual Have become dirty ex pg FingerprintsThat explains LCD monitor Viewfinder indications74 EN Cleaning The CamcorderAfter Use Use only the following batteries AAA R03 size x To prevent damage and prolong service lifeTo avoid hazards Do not burn76 EN Serious malfunctioning About moisture condensation78 EN Storage media Power requirementCompression system File size80 EN Controls, Connectors And IndicatorsPower Switch OPEN/EJECT Switch pgAudio/Video Output Connector Ustandard Video Output ConnectorIndex Indications 82 EN1024 # @ Displays the sound mode Volume84 EN LCD Monitor/Viewfinder Indications During Tape PlaybackIndications Appears when the date/time is not set pg86 EN Mail Clip Recording Darken The LCD MonitorFade-In/Out Gain UpWebCam Unload a TapeSee previous page as well