JVC GR-DVL867, GR-DVL865, GR-DVL567 specifications Make Connections, Also refer to pg

EN 59

To S-VIDEO

S-Video cable (optional)

To AUDIO, VIDEO* and -IN connectors

Connector cover**

To JLIP***

or EDIT*** To AV

Audio/Video cable (provided)

Editing cable (provided)

MAKE CONNECTIONS

Also refer to pg. 22 and 23.

1 A JVC VCR equipped with a remote pause connector . . .

..... connect the editing cable to the Remote PAUSE connector.

A JVC VCR not equipped with a remote pause connector but equipped with an R.A.EDIT connector . . .

..... connect the editing cable to the R.A.EDIT

connector.

A VCR other than above . . .

..... connect the editing cable to the remote control’s

PAUSE IN connector.

2 Insert a recorded tape into the camcorder. Set the VIDEO/MEMORY Switch to “VIDEO” (GR-DVL867/ DVL865/DVL767/DVL765/DVL567/DVL367/DVL365 only), then set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).

	If your VCR has the
“Y/C”/“CVBS”	SCART connector,
	use the provided
video out
	cable adapter.
select switch
	To Remote
VCR	PAUSE or R.A.EDIT

To PAUSE IN

TV

DISPLAY

*Connect when an S-Video cable is not used. ** When connecting cables, open this cover.

*** JLIP : GR-DVL167/DVL160

EDIT : GR-DVL867/DVL865/DVL767/DVL765/ DVL567/DVL367/DVL365

For GR-DVL167/DVL160 Owners:

ATTENTION FOR EDITING CABLE

Make sure you connect the end with the core filter (plug which has 3 rings around the pin) to the camcorder.

NOTES:

●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (
pg. 50).

Or, press DISPLAY on the remote control (provided) to turn on/off the date indication.

•Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (
pg. 50).

•Playback Sound Mode, Tape Speed And Tape Running Displays

..... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu

Screen (
pg. 50).

●Set the video out select switch of the cable adapter as

required:

Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an S-Video cable and audio/video cable.