JVC GR-DVL567, GR-DVL865, GR-DVL867 Automatic Editing to VCR, Recording Start/Stop Button

EN 61

	Recording Start/Stop Button
	I N	OUT	MODE	Random Assemble
1	00 : 2 5	~ 02 : 05	– – – –	Editing Menu
2 – – 07 : 18 ~ 08 : 31 – – – –
3 – – 0 3 : 33 ~ 05 : 53
4	09 : 30 ~ 13 : 15
5	15 : 55	~ 16 : 29 – – – –
6 – –	– – : – –	~

7~

8~

T I ME CODE	1 6	: 3 0
TOTAL	9	: 39

Remote Sensor

PAUSE

R.A.EDIT

ON/OFF

AUTOMATIC EDITING TO VCR

11Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE (6).

12Point the remote control towards the VCR’s remote sensor and press VCR REC STBY (q6), or manually engage the VCR’s Record-Pause mode.

13Press the Recording Start/Stop Button on the camcorder. Editing proceeds as programmed, right through to the end of the last registered scene.

•When dubbing is complete, the camcorder enters the Pause mode, and the VCR enters its Record- Pause mode.

•If you do not register an Edit-Out point, the tape will be dubbed all the way to the end automatically.

•If you operate the camcorder during automatic editing, the VCR will enter its Record-Pause mode and automatic editing will stop.

14Engage the Stop modes for the camcorder and the VCR.

To make the R.A.Edit counter display disappear, press R.A.EDIT ON/OFF on the remote control.

NOTES:

●Pressing R.A.EDIT ON/OFF on the remote control clears all settings registered during Random Assemble Editing.

●When the editing cable is connected to the remote control’s Pause In connector during dubbing, make sure the remote control is pointed at the VCR’s sensor, and the path between the two is unobstructed.

●Random Assemble Editing may not function properly

when using a tape including several duplicated time codes (
pg. 20).

CONTINUED ON NEXT PAGE

VCR REC STBY