JVC GR-DVM828 manual VCR/TV Connection using AC Charger Station, Attach and Lock

Page 55

EN55

VCR/TV Connection (using AC Charger Station)

Attach the camcorder to the AC Charger Station, then connect the AC Charger Station to a TV or VCR (☞ pg. 56, 57), as described in the following steps.

Power cord

To AC outlet

Mark

Power lamp

CAMERA charger indicator

Lock!

Lock lever (with the Release button)

1 CONFIRM POWER-OFF STATUS Make sure the camcorder’s power is off.

2 ATTACH AND LOCK

Align the mark on the camcorder with the one on the AC Charger Station and slide the camcorder to the AC Charger Station in the direction of the arrow. Slide the lock lever on the AC Charger Station in the direction of the arrow until it clicks. The camcorder and the AC Charger Station are now securely attached.

•When removing the camcorder, press the Release button and slide the lock lever in the opposite direction of the arrow and detach the camcorder in the opposite direction of the arrow.

•The AC Charger Station cannot function using the camcorder’s battery pack.

NOTE:

Never touch the connector on the bottom of the camcorder or on the AC Charger Station. If the pins are damaged, the connectors will become unusable due to contact failure.

INFORMATION:

Charging The Camcorder Battery Pack

If you attach the camcorder with the battery installed to the AC Charger Station, you can charge the battery pack. After doing steps 1 and 2 above, plug the AC Charger Station’s power cord into an AC outlet. The AC Charger Station’s CAMERA charger indicator starts blinking to indicate that charging has begun. When it stops blinking but stays on, charging is complete. The charging time for one BN-V607U battery pack is approx. 100 minutes.

Charging Two Battery Packs

If two battery packs are attached to the AC Charger Station (one attached to the AC Charger Station and one in the camcorder attached to it), they will be charged in the order that they were attached.

The charging time for two BN-V607U battery packs is approx. 190 minutes.

NOTE:

To charge the battery pack installed in the camcorder, be sure to switch off the camcorder first. If it is not switched off, charging will not begin.

Image 55

Contents GR-DVM828 Connection to the mains supply in the United Kingdom Dear CustomerSafety Precautions VIDEO/AUDIO cable Battery pack BN-V607UDC cord Grip/Hand strapDV30ME Lithium battery CR2025For remote control unit RM-V712U Min DVM-30Video Area Audio Area Sub-Code AreaITI Insert and Tracking Information Area Contents Charging The Battery Pack Close Battery Cover Installing The Battery PackOpen Battery Cover Insert Charged BatteryIndoor Use Using The Battery HolderLCD monitor Date/Time SettingsSelect Operation Mode Input Date and TimeTo protect valuable recordings Loading/Unloading a CassetteOpen Cassette Cover INSERT/REMOVE TapeSET Recording Mode Recording Mode SettingSelect Dial Attach Grip Strap to SUB Hand Strap Eyelet Adjust LengthGrip Strap Attachment Attach Grip Strap to Hand Strap EyeletTurn on Camcorder Dioptre AdjustmentAdjust Dioptre Tripod MountingInsert Battery in Holder Remote Control UnitInstalling The Battery Pull OUT Battery HolderFunction Operation ModePower Dial Position Self-Timer Playback PlayIND. ON/OFF button Display EN RecordingEND Recording Pull OUT Viewfinder or Open LCD MonitorStart Recording Stop RecordingRecording From The Middle Of a Tape Engage Still ModeStart Search Time Code When blank portion is recorded on a tapeProper recording LCD Monitor/Viewfinder Indications Tape Remaining IndicatorAdjust Brightness Brightness ControlTilt LCD Monitor Journalistic shootingInterface Shooting Open LCD MonitorZoom EN RecordingSelect Function Displaying The Date And Time During RecordingMenu button IND. ON/OFF button Select Dial END 5-SECOND Mode Recording Engage 5S ModeScene 5-second recording END SELF-TIMER Recording Self-TimerEngage SELF-TIMER Mode Stop SELF-TIMER RecordingTake Snapshot Access System MenuSelect Snapshot Mode SnapshotSnapshot mode Pin-Up mode With frame Motor Drive modeClose Recording Menu MenusRecording Menu allows you to set these functions 40X REC Mode Recording mode10X 40X DIS Digital Image Stabilizer Zoom Zoom magnificationClose System Menu System Menu32kHz 48kHz 32kHzFADE/WIPE Effects Accessmenu Manual Mode ItemAccess FADER/WIPE Menu To Cancel FADE/WIPE EffectsWH , BK , , B W Fades and WipesExample WH Fader White Example Wipe ScrollResume Recording Picture Wipe/DissolveP and P of the Fader/Wipe Menu Random Variations Fader B.W Fader WhiteFader Black Fader MosaicDissolve Fader and Wipe MenuRandom AE/Effects Disable P.AE/EFFECTSlow Slow Shutter To Change To Auto Focus Manual Focus AdjustmentAccess Manual Focus Adjust FocusTo Return To Automatic Exposure Control Adjust ExposureExposure Control Brightness control of the displayTo Return To Automatic Iris Control Iris LockIris To Return To Automatic White Balance White Balance AdjustmentAccess White Balance Adjustment Close White Balance AdjustmentTo Change The Tint For Recording Enter SettingExit Manual White Balance Adjustment Manual White Balance OperationEND Playback Volume switchRewind Tape Viewing RecordingPress 2 or 3after pressing 6/4. The tape To Perform High-Speed SearchEND Zoom Playback ZoomActivate Zoom Locatescene Portion of MagnifiedPlayback Effects Accessmenu Playback Effect SelectPlayback Menu allows you to set the following functions Access Playback MenuPlayback Menu Close MenuDisplaying the Date During Playback Playback SoundDisplaying The Time Code During Playback Turn on Power VCR/TV Connection when connecting directly to the camcorderSelect TV’S Video Mode Attach and Lock VCR/TV Connection using AC Charger StationBasic Connections VCR/TV connection using the AC Charger StationConnect AC Charger Station to TV or VCR Digital Printer Connection To a Video Unit Equipped With a DV ConnectorAttach Camcorder to AC Charger Station Supply PowerRecording deck DubbingMake Connections Start Playback Pause RecordingMake Connections Digital DubbingOperate VCR Brand SettingVCR Recording deck Execute FADE/WIPE in if Necessary Random Assemble EditingSET EDIT-OUT Point SET EDIT-IN PointUSE P.AE/EFFECT if Necessary Start Editing Engagemode VCR’S RECORD-PAUSEStop Editing Prepare for R.A. Edit Play Back Dubbed Scene For More Accurate EditingChoose a Scene Input Correction Data Adjustment of VCR‘s against Camcorder TimingPause During Dubbing Audio DubbingFind EDIT-IN Point Begin DubbingRecording Sound Display Output Sound Troubleshooting Possible Causes Troubleshooting Symptom Possible Causes These spots are not recorded Cleaning The Camcorder Camcorder Viewfinder pg Power dial pgVolume switch Volume pg Zoom switch T/W pgAC Charger Station 250 LCD Monitor/Viewfinder Indications During RecordingFunction LP 35 minLCD Monitor/Viewfinder Indications During Playback Tape END ErrorIndications Function TapeStore cassettes To prolong service lifeTo avoid hazard During useDo not leave the unit For safety, do notAvoid using the unit Dirty heads can cause the following problemsVideo GeneralAudio Audio ConnectorsOutput power VideoOn-screen display Colour temperatureAC Charger Station Auto focusIndex GR-DVM828